下面以ü形接口無骨雨刮的更換方法如下：1，選取和原車長度相同的雨刮片0.2，舉起兩個雨刮片臂0.3，用手按住雨刮片蓋卡扣，打開掛鉤蓋子，滑動雨刮片，直到將其從雨刮片臂上松開，然后取下舊的雨刮片0.4，把雨刮片臂掛鉤從蓋子中間的空位穿過去，鉤入新雨刮片，壓緊0.5，蓋回蓋子，壓入卡扣，完成更換0.6，檢查，確保雨刮片已安裝牢固方可使用。到此，恭喜你已經成功更換完雨刮片，是不是很簡單，有沒有人想躍躍欲試?。縓X

有刮骨器和無骨刮水器嗎？ （1）在沒有骨刮水器的無骨刮水器出現之前，刮水器一直是主要制造商的標準配置。骨擦拭器的問題在于它在擦拭器刮片和玻璃之間易于摩擦，不容易刮掉雜質，并且難以承受大的壓力，但價格相對便宜。 （2）無骨刮水器為了改善骨架刮水器的問題，近年來出現了無骨刮水器。它使用整個刮水片本身加壓，這相當于整個刮水片。骨刮水器的擦拭效果非常好。另外，無骨雨刷鋼板的彈性優于普通的骨雨刷鋼板，可以減少抖動磨損，減少刀片對玻璃的磨損。無骨刮水器最初安裝在所有主要的奢侈品牌上，但隨著無骨刮水器的成本變得更低，許多型號開始使用無骨刮水器。

In contact with the glass type, the wiper should be cleaned except for its structure. The important part is the strip. Since the wiper wipes the glass rainwater by the wiper strip, the strip design is very important. The wiper strip material is divided into two categories: natural rubber and synthetic rubber, among which synthetic rubber has a long service life. Generally, the high-grade wiper will be made of double-layer rubber. The soft rubber will be used at the joint between the strip and the steel to ensure good smoothness when wiping, and the glass is bonded to the glass. A slightly hard material allows the strip to have a certain amount of force to scrape the rain. In addition, the grade of the strip will also affect the quietness and service life of the wiper. Some products will add an additional graphite component to make the wiper quieter and smoother.xx