下面以ü形接口無骨雨刮的更換方法如下：1，選取和原車長度相同的雨刮片0.2，舉起兩個雨刮片臂0.3，用手按住雨刮片蓋卡扣，打開掛鉤蓋子，滑動雨刮片，直到將其從雨刮片臂上松開，然后取下舊的雨刮片0.4，把雨刮片臂掛鉤從蓋子中間的空位穿過去，鉤入新雨刮片，壓緊0.5，蓋回蓋子，壓入卡扣，完成更換0.6，檢查，確保雨刮片已安裝牢固方可使用。到此，恭喜你已經成功更換完雨刮片，是不是很簡單，有沒有人想躍躍欲試?。縓X

Do not forget the wiper blade for washing the car: wipe the wiper strip with a glass cleaning solution when washing the car, wipe it clean and then wash it with water, but it should be noted that the cleaning agent used should not contain ammonia, which is the cause of the hardening of the strip. In general, soap and disinfectant used in the home contain ammonia. Avoid prolonged exposure: Under continuous high temperature, the strip on the wiper blade may deform or lose its elasticity. If the owner intends to park the car for a few days outdoors, it is recommended to stop in the shade or buy a good suit for the car. It not only protects the wiper blades, but also does not have to worry about the body being surrounded by dust, leaves and dirt. Use qualified glass water: Many people use tap water as wiper water. This is not right. Special glass water has the function of cleaning glass and protecting the wiper. The qualified glass water can improve the cleaning effect and protect the life of the wiper.xx

該傳感器位于內后視鏡上方，通過檢測擋風玻璃上滴落的水量來控制雨刮器自動擦拭。 （雨刮器開關處于AUTO位置）當組合開關損壞或發生故障時，車輛將進入跛行模式。此時，近光燈將自動點亮，雨刮器將根據以下條件運行：1。有雨量傳感器，根據雨量傳感器需要?jiǎng)幼? 2.未配置雨量傳感器，雨刷開關手柄被切換，雨刮器繼續以低速模式擦拭。請勿觸摸車輛外部雨量傳感器的檢測區域。否則，當刮水器開關處于AUTO位置時，刮水器可能會被劃傷，從而對人員和車輛造成損壞。