下面以ü形接口無骨雨刮的更換方法如下：1，選取和原車長度相同的雨刮片0.2，舉起兩個雨刮片臂0.3，用手按住雨刮片蓋卡扣，打開掛鉤蓋子，滑動雨刮片，直到將其從雨刮片臂上松開，然后取下舊的雨刮片0.4，把雨刮片臂掛鉤從蓋子中間的空位穿過去，鉤入新雨刮片，壓緊0.5，蓋回蓋子，壓入卡扣，完成更換0.6，檢查，確保雨刮片已安裝牢固方可使用。到此，恭喜你已經成功更換完雨刮片，是不是很簡單，有沒有人想躍躍欲試?。縓X

擦拭器不工作時的條件是什么：（1）條紋條紋：擦拭條不與玻璃完全接觸;不適當?shù)氖直蹓毫蛏喜拷Y(jié)構損壞，甚至不正確的雨刷片都會造成這種現象; 2）有條紋的條紋：使用刮水器將油性薄膜分布在擋風玻璃上，通常是由于灰塵或汽車蠟附著在玻璃上;雨刷條被汽車蠟和油漬污染; （3））細水現象：刮水器擦拭擋風玻璃時，玻璃表面仍有小水滴。這種現象是由汽車蠟，油污或硅化物粘在擋風玻璃，橡膠條或橡膠條本身上的質量引起的。 （4）“咔噠”或刺耳的噪音：刮水器不規則刮擦?xí)r，主要是由于鋼帶的磨損，手臂和支架的損壞以及鋼帶的老化變形造成的。在沒有潤滑的情況下，當刮水器掃過玻璃時，也會產生摩擦聲。

In contact with the glass type, the wiper should be cleaned except for its structure. The important part is the strip. Since the wiper wipes the glass rainwater by the wiper strip, the strip design is very important. The wiper strip material is divided into two categories: natural rubber and synthetic rubber, among which synthetic rubber has a long service life. Generally, the high-grade wiper will be made of double-layer rubber. The soft rubber will be used at the joint between the strip and the steel to ensure good smoothness when wiping, and the glass is bonded to the glass. A slightly hard material allows the strip to have a certain amount of force to scrape the rain. In addition, the grade of the strip will also affect the quietness and service life of the wiper. Some products will add an additional graphite component to make the wiper quieter and smoother.xx