新澤西護欄模具 樂豐護欄模具廠家 使用步驟  新澤西護欄模具吊裝的時候，安裝事項須知：

1）大型的新澤西護欄模具在進行現場施工的時候，因?yàn)轭A(yù)制件的規格過于重，所以都是采取升降機吊裝的方式，尤其是在橋梁上等，高處進行安裝的時候；

2）新澤西護欄模具在進行吊裝的時候，需要吊裝工人的很穩定的，較準確的進行組裝，不能出現太大的偏差，否則使得對接口，對接不上；

3）在安裝的時候不能使用吊鉤的形式進行，不然是對混凝土的破壞，所以在進行高空吊裝的時候，要選擇捆綁式的卡環吊裝形式；

4）施工的過程，在施工現場嚴禁施工工人還有其他人員過于接近施工現場，避免人員傷亡，還有不固定的危險發生；

5）每次進行組裝的時候，施工前還有施工后，都要確保施工現場的安全性，確保預制件的安全性，還有人員的安全性。

When the New Jersey guardrail mold is hoisted, installation instructions:

1) in the field construction of large New Jersey guardrail mold, because the specification of prefabricated parts is too heavy, the lift hoisting method is adopted, especially when the installation is carried out on the bridge and at a high place;

2) when the New Jersey guardrail mold is hoisted, it needs to be assembled stably and accurately by the hoisting workers without too large deviation, otherwise, the interface cannot be connected;

3) during installation, the form of hook cannot be used, otherwise it will damage the concrete, so when lifting at height, the binding type of snap ring shall be selected;

4) during the construction process, it is strictly forbidden for construction workers and other personnel to approach the construction site too much to avoid casualties and unstable risks;

5) during each assembly, before and after construction, the safety of the construction site, prefabricated parts and personnel shall be ensured.