宏旭—公路預制隔離墩模具—公路隔離墩模具

公路預制隔離墩模具的脫模技巧為：首先在模具的內(nèi)側(cè)刷一層機油或者脫模劑，然后將攪拌好的水泥混凝土置入模具里面，最后經(jīng)過振動平臺振動幾秒鐘后成形，等到水泥混凝土自然凝固后方可脫模。隔離墩模具養(yǎng)護方法公路預制隔離墩模具在使用完后要對表面殘留的混凝土進行清理，然后在隔離墩模具上噴一層機油，公路預制隔離墩模具禁止與化學物品一起存放，以免生銹。The demoulding technique of highway prefabricated isolation pier mold is: firstly, brush a layer of oil or release agent on the inner side of the mold, then place the mixed cement concrete into the mold, and finally form the mold after vibrating for several seconds through the vibration platform, and demould after the cement concrete naturally sets. Maintenance method of highway precast isolation pier mold after using, the residual concrete on the surface shall be cleaned, and then a layer of oil shall be sprayed on the mold of isolation pier. The mold of highway prefabricated isolation pier shall not be stored together with chemicals to avoid rust.