進口三偏心蝶閥德國洛克品牌產品介紹

一、進口三偏心蝶閥產品簡介：

德國《LOCKE》洛克進口三偏心蝶閥主要結構特征為對夾式和法蘭三偏心式結構,閥體周邊帶凸耳設計成帶螺孔單法蘭結構。蝶閥廣泛應用于石油、化工即工業環境水處理、高層建筑，給排水等管道上。器特點為：由于采用三偏心結構。密封性能可靠，確保開啟時蝶閥不接觸密封座，消除了密封座不均勻負載，延長了使用壽命，確保可靠的密封性能，具有耐高溫、耐磨損、耐腐蝕等優點。

The main structural features of lock imported three eccentric butterfly valve are wafer type and flange three eccentric type. The valve body with lugs around is designed as a single flange structure with screw holes. Butterfly valve is widely used in petroleum, chemical industry, such as industrial environmental water treatment, high-rise buildings, water supply and drainage pipes. The device features three eccentric structures. The sealing performance is reliable, ensuring that the butterfly valve does not contact the sealing seat when opening, eliminating the uneven load of the sealing seat, extending the service life, ensuring reliable sealing performance, with the advantages of high temperature resistance, wear resistance, corrosion resistance, etc.

二、進口三偏心蝶閥主要零件材料：

閥體：WCB、CF8、CF8M、CF8C、CF3、CF3M

閥桿：1Cr13、2Cr13、1Cr18Ni9Ti、0Cr18Ni12Mo2Ti

蝶板組合件：WC+f4、WCB+不銹鋼復合件，WCB+F6、CF8、CF8M

軸套：Cu、PTFE+不銹鋼

填料墊：2Cr13

填料：柔性石墨

填料壓蓋：WCB、CF8、CF8M  

支架：WCB、CF8、CF8M、3、CF3M

Valve body: WCB, CF8, CF8M, cf8c, CF3, cf3m

Stem: 1Cr13, 2Cr13, 1Cr18Ni9Ti, 0Cr18Ni12Mo2Ti

Butterfly plate assembly: WC + F4, WCB + stainless steel composite, WCB + F6, CF8, CF8M

Shaft sleeve: Cu, PTFE + stainless steel

Packing pad: 2Cr13

Packing: flexible graphite

Packing gland: WCB, CF8, CF8M

Bracket: WCB, CF8, CF8M, 3, cf3m

三、進口三偏心蝶閥結構特點：

1．結構獨特、型小輕便、操作靈活、省力、方便；  

2．密封可靠，可達到氣密封無泄漏；  

3．流量特性趨于直線調節性有最佳；  

4．采用三偏心原理，使密封面近似零靡損延長了閥門的使用壽命；  

5．應用范圍廣。如：可用于水、蒸氣、油品、空氣、煤氣等介質。  

6．適用不同溫度及以下的壓力等級，耐腐蝕等各種介質管線。

1. Unique structure, small and light, flexible operation, labor-saving and convenient;

2. The sealing is reliable, and the airtight seal is leak free;

3. The flow characteristics tend to have the best linear regulation;

4. Using the three eccentricity principle, the sealing surface is nearly zero loss, extending the service life of the valve;

5. Wide application range. Such as: can be used for water, steam, oil, air, gas and other media.

6. It is applicable to various medium pipelines with different temperature and lower pressure grade and corrosion resistance.

四、進口三偏心蝶閥密封原理：

三偏心蝶閥具有雙向無氣泡緊密關閉性能，這種幾何形狀保證閥瓣密封只是在關閉位置時才與閥體閥座接觸，因此不會產生摩擦或磨損，并且產生一種扭矩使得彈性密封具有足夠的“焊接"性能，確保密封接觸的均勻一致性。

由于在雙偏心蝶閥的基礎上將閥座中心線形成一個角偏置，使得蝶閥在開啟過程中，蝶板的密封面在開啟瞬間立即脫離閥座密封面。而在關閉瞬間才會接觸并壓緊閥座密封面。當完全開始時，兩密封面之間形成一個與雙偏心密封蝶閥相同間隙，該類蝶閥的設計，徹底消除了兩密封面之間的機械磨損和擦傷，使蝶閥的密封性能和壽命都得到大大提高

The three eccentric butterfly valve has a two-way bubble free close performance. This geometry ensures that the disc seal only contacts with the valve body seat in the closed position, so there is no friction or wear, and a torque is generated to make the elastic seal have enough "welding" performance, so as to ensure the uniform contact of the seal.

Since the center line of the valve seat is offset by an angle on the basis of the double eccentric butterfly valve, the sealing surface of the butterfly plate immediately disengages from the sealing surface of the valve seat in the opening process. The sealing surface of the valve seat will be contacted and compressed at the moment of closing. At the beginning, the gap between the two sealing surfaces is the same as that of the double eccentric sealing butterfly valve. The design of this kind of butterfly valve completely eliminates the mechanical abrasion and scratch between the two sealing surfaces, and greatly improves the sealing performance and service life of the butterfly valve

五、進口三偏心蝶閥結構特征：

第一個偏心：軸偏離密封面中心線

第二個偏心：軸偏離管路及閥門中心線

第三個偏心：其獨特的偏心閥座斜錐角與管路中心的夾角，這樣，使得閥座與密封圈在閥門整個開關過程中完全脫離。這種結構既利用了凸輪效應，又完全消除了摩擦，去除了磨損和泄漏的可能。

零泄漏：三偏心蝶閥依靠安裝在蝶板上的復合不銹鋼密封圈來實現真正的零泄漏。

零泄漏是通過蝶板上密封圈的彈性來實現的。該密封圈的總結性是通過其徑向的壓縮和柔動產生的。密封圈與閥座接觸面為斜錐面。密封圈與閥座之間的接觸角產生輕微的“楔式效應"，使密封圈發生柔動和徑向壓縮。正由于閥座與密封圈之間均勻接觸以及密封圈的柔性，使得加載在閥座上的載荷均勻，從而用最小的扭矩實現最嚴密的切斷。扭矩產生的彈性使得閥門嚴密關斷，而與介質流向或介質壓力無關。

First eccentricity: the shaft deviates from the centerline of the sealing surface

Second eccentricity: the shaft deviates from the center line of pipeline and valve

The third eccentricity: its unique angle between the inclined cone angle of the eccentric valve seat and the center of the pipeline, so that the valve seat and the sealing ring are completely separated during the whole opening and closing process of the valve. This structure not only uses the cam effect, but also completely eliminates the friction, eliminating the possibility of wear and leakage.

Zero leakage: the three eccentric butterfly valve relies on the composite stainless steel sealing ring installed on the butterfly plate to achieve true zero leakage.

Zero leakage is achieved by the elasticity of the sealing ring on the butterfly plate. The summation of the seal ring is produced by its radial compression and flexible movement. The contact surface between the sealing ring and the valve seat is an inclined cone. The contact angle between the seal ring and the valve seat has a slight "wedge effect", which makes the seal ring flexible and radial compression. Due to the uniform contact between the valve seat and the sealing ring and the flexibility of the sealing ring, the load on the valve seat is even, so as to achieve the most tight cut-off with the minimum torque. The elasticity produced by torque makes the valve close tightly, which is independent of medium flow direction or medium pressure.

六、進口三偏心蝶閥主要參數：

1、公稱通徑：DN50-2000mm

2、公稱壓力：PN1.0-10.0Mpa

3、結構形式：三偏心

4、設計依據：GB                 

5、驅動方式：手動，蝸輪傳動，電動等

6、設計標準：GB/12238、API609、MSS.SP-68

7、結構長度: GB/T12221 ASMEB16.10、API609、MSS.SP-6

8、連接法蘭: JB/T79 JB/T82、GN/T9115 ASME B16.5、ASME B16.47

9、試驗和檢驗:JB/T 9092 API 1598

10、注：閥門連接法蘭及對焊端尺寸可根據用戶要求設計制造

1. Nominal diameter: dn50-2000mm

2. Nominal pressure: pn1.0-10.0mpa

3. Structural form: three eccentricities

4. Design basis: GB

5. Driving mode: manual, worm gear drive, electric, etc

6. Design standard: GB / 12238, API609 MSS.SP -68

7. Structure length: GB / t12221 asmeb16.10, API609 MSS.SP -6

8. Connecting flange: JB / t79 JB / T82, GN / t9115 ASME B16.5, ASME b16.47

9. Test and inspection: JB / T 9092 API 1598

10. Note: the size of valve connecting flange and butt welding end can be designed and manufactured according to the user's requirements