德國洛克進口高壓過濾器的工作原理與使用方法

一、進口高壓過濾器概述：

德國《LOCKE》洛克進口高壓過濾器(high pressure filter)用于2.5MPA, 600℃以下高溫高壓氣、液體連接的硬管路系統的過濾器。

不銹鋼濾芯采用錐形孔，均勻分布在濾芯四周側面，流體介質從錐形孔大端進小端出，流速加快，更易清洗濾芯內污物。本過濾器結構合理，使用方便。適用水、油品、蒸汽、天然氣、液化氣、氣體、液體以及某些腐蝕性液體等中高壓介質。產品廣泛應用于水處理設備、化工設備、石化設備、石油設備、造紙?jiān)O(shè)備、采礦設備、電力設備配套等領域。

The high pressure filter imported by Locke in Germany is used for the filter of the hard pipeline system connected with 2.5MPa, high temperature and high pressure gas and liquid below 600 ℃.

The stainless steel filter element adopts the tapered hole, which is evenly distributed around the filter element. The fluid medium enters from the large end of the tapered hole and exits from the small end. The flow speed is faster, and it is easier to clean the dirt in the filter element. The filter has reasonable structure and convenient use. It is suitable for medium and high pressure media such as water, oil, steam, natural gas, liquefied gas, gas, liquid and some corrosive liquids. Products are widely used in water treatment equipment, chemical equipment, petrochemical equipment, petroleum equipment, papermaking equipment, mining equipment, power equipment and other fields.

二、進口高壓過濾器優點：

1.與同等流量過濾器相比，結構緊湊體積小。
2.使用壓力范圍寬。
3.換濾芯方便，用戶可根據安裝空間，打開上蓋，更換濾芯，可以旋下外殼（先放油）從下面取下濾芯。
4.安裝固定方便：如用戶按標準流向安裝有困難時可拆下蓋上4個螺釘，把蓋轉動180度。這樣就改變了介質流動方向。
5.該過濾器設有旁通閥和壓差發訊裝置，雙重保護功能。當濾芯污染堵塞至進出口壓差值為發訊器調定值時，發訊器發訊，此時必須更換濾芯。

1. Compared with the same flow filter, it has compact structure and small volume.

2. Wide application pressure range.

3. It is convenient to change the filter element. The user can open the upper cover and change the filter element according to the installation space. The user can unscrew the shell (drain oil first) and remove the filter element from the bottom.

4. Convenient installation and fixation: if it is difficult for users to install according to the standard flow direction, remove 4 screws on the cover and turn the cover 180 degrees. This changes the flow direction of the medium.

5. The filter is equipped with a bypass valve and a differential pressure transmitter, with dual protection function. When the filter element is polluted and blocked until the pressure difference between the inlet and outlet is the set value of the transmitter, the transmitter sends a message, and the filter element must be replaced at this time.

三、進口高壓過濾器技術參數：

1、規格范圍：DN15-DN500

2、溫度范圍：-20℃≈600℃

3、壓力范圍：PN16-PN320

4、閥體材質：WCB/SS304/SS316/WC6/WC

5、濾網材質：WCB/SS304/SS316

6、連接方式：法蘭

7、適用范圍：水、油品、蒸汽、天然氣、液化氣、氣體、液體以及某些腐蝕性液體等

1. Specification range: dn15-dn500

2. Temperature range: - 20 ℃ ~ 600 ℃

3. Pressure range: pn16-pn320

4. Valve body material: WCB / SS304 / SS316 / wc6 / WC

5. Filter screen material: WCB / SS304 / SS316

6. Connection method: flange

7. Scope of application: water, oil, steam, natural gas, liquefied gas, gas, liquid and some corrosive liquid, etc