德國洛克供應優質進口惰性氣體減壓閥

一、進口惰性氣體減壓閥設計特點：

● 活塞式減壓結構 ● 母體螺紋：1/4" NPT（F） ● 內設過濾網 ● 可采用面板式或墻式安裝

■ 適用范圍

● 實驗室 ● 氣體分析測試 ● 流程控制 ● 氣體匯流排 ● 測試設備

■ 特性參數

● 最大輸入壓力： 3000，6000psig   ● 輸出壓力：0~250,0~500,0~1500,0~3000psig

● 安全測試壓力：1.5倍的最大進氣壓力 ● 適用溫度：-10℉~+165℉(-23℃~+74℃)

● 泄漏率：泡沫測試 ● CV值：0.06 ● 重量：0.9kg

材質：

◆母體：316L，Brass

◆上蓋：316L，Brass

◆膜片：316L

◆過濾網：316L（10μm）

◆閥座：PCTFE，PTFE，Vespel

◆彈簧：316L

◆閥芯頂桿：316L

Piston type pressure reducing structure ● mother thread: 1 / 4 "NPT (f) ● filter screen inside ● can be installed in panel or wall

■ scope of application

● laboratory ● gas analysis and test ● process control ● gas bus ● test equipment

Characteristic parameters

Maximum input pressure: 30006000 psi ● output pressure: 0 ~ 250,0 ~ 500,0 ~ 1500,0 ~ 3000psi

Safety test pressure: 1.5 times of maximum inlet pressure ● applicable temperature: - 10 ℃～ 165 ℃ (- 23 ℃ ~ + 74 ℃)

Leakage rate: foam test > CV: 0.06: weight: 0.9kg

texture of material:

Maternal body: 316L, brass

Upper cover: 316L, brass

Membrane: 316L

Filter screen: 316L (10 μ m)

Valve seat: PCTFE, PTFE, Vespel

Spring: 316L

Valve core ejector: 316L

二、進口惰性氣體減壓閥產品特征：

進口惰性氣體減壓閥，單級式膜片減壓結構，不銹鋼膜片壓力傳輸，輸出壓力穩定，適用于純凈氣體、標準氣體、腐蝕性氣體等。用用于石油化工、化纖、照明電器、熱處理、冶金、玻璃、食品、醫藥、電子、國防航天等主導領域。

德國洛克進口惰性氣體減壓閥接口可以適配國內所有規格的鋼瓶接口，特有的入口壓力補償技術抵消了因鋼瓶用氣后壓力下降導致的閥后壓力變動的問題。

Imported inert gas pressure reducing valve, single-stage diaphragm pressure reducing structure, stainless steel diaphragm pressure transmission, stable output pressure, suitable for pure gas, standard gas, corrosive gas, etc. It is used in petrochemical, chemical fiber, lighting appliances, heat treatment, metallurgy, glass, food, medicine, electronics, national defense and aerospace.

The connection of inert gas pressure reducing valve imported from Germany Locke can adapt to all domestic cylinder interfaces. The unique inlet pressure compensation technology can offset the problem of pressure change behind the valve caused by the pressure drop of cylinder after using gas.

三、進口惰性氣體減壓閥規格參數：

◆最大輸入壓力：3000，500 psig

◆輸出壓力：0～25，0～50，0～100， 0～250 psig

◆安全測試壓力：1.5倍的最大輸入壓力

◆適用溫度：-40°F 至＋165°F（-40℃至＋74℃）

Maximum input pressure: 3000500 PSI

Output pressure: 0-25, 0-50, 0-100, 0-250 psi

Safety test pressure: 1.5 times of the maximum input pressure

Applicable temperature: - 40 ° f to + 165 ° f (- 40 ℃ to + 74 ℃)

四、進口惰性氣體減壓閥產品簡介：

惰性氣體一般都是貯存在專用的高壓惰性氣體鋼瓶中，使用時通過進口惰性氣體減壓閥,使惰性氣體壓力降至實驗或者工況所需的壓力范圍，再經過其它控制閥門細調，使惰性氣體體輸入使用系統。采用活塞式減壓結構，輸出壓力穩定，主要用于高輸入壓力要求，最大壓力達6000 psig，適用于惰性氣體。

Inert gas is generally stored in special high-pressure inert gas cylinder. When used, the inert gas pressure is reduced to the pressure range required by the experiment or working condition through the imported inert gas pressure reducing valve, and then the inert gas body is input into the use system through fine adjustment of other control valves. It is mainly used for high input pressure requirements. The maximum pressure is up to 6000 psi. It is suitable for inert gas.