進口壓縮氣體瓶減壓閥德國洛克《DE LOCKE》現貨供應  

一、進口壓縮氣體瓶減壓閥結構特征：

進口壓縮氣體瓶減壓閥，單級式膜片減壓結構，不銹鋼膜片壓力傳輸，輸出壓力穩定，適用于純凈壓縮氣體體、標準壓縮氣體體、腐蝕性壓縮氣體體等。用用于石油化工、化纖、照明電器、熱處理、冶金、玻璃、食品、醫藥、電子、國防航天、航空等主導領域。

德國《LOCKE》洛克進口壓縮氣體瓶減壓閥接口可以適配國內所有規格的鋼瓶接口，特有的入口壓力補償技術抵消了因鋼瓶用壓縮氣體后壓力下降導致的閥后壓力變動的問題。

Imported compressed gas bottle pressure reducing valve, single-stage diaphragm pressure reducing structure, stainless steel diaphragm pressure transmission, stable output pressure, suitable for pure compressed gas body, standard compressed gas body, corrosive compressed gas body, etc. It is used in petrochemical industry, chemical fiber, lighting appliances, heat treatment, metallurgy, glass, food, medicine, electronics, national defense, aerospace, aviation and other leading fields.

The pressure reducing valve interface of Locke imported compressed gas cylinder in German "Locke" can adapt to all specifications of domestic cylinder interfaces. The unique inlet pressure compensation technology offsets the problem of pressure change behind the valve caused by the pressure drop of compressed gas used in cylinder.

二、進口壓縮氣體瓶減壓閥描述：

德國LOCKE洛克進口壓縮氣體瓶減壓閥壓縮氣體一般都是貯存在專用的高壓壓縮氣體體鋼瓶中，使用時通過減壓閥使壓縮氣體體壓力降至實驗或者工況所需的壓力范圍，再經過其它控制閥門細調，使壓縮氣體體輸入使用系統。進口壓縮氣體瓶減壓閥就是將鋼瓶中的高壓壓縮氣體減為實驗或者工況所需的壓縮氣體壓力的減壓閥。采用活塞式減壓結構，輸出壓力穩定，主要用于高輸入壓力要求，最大壓力達6000 psig，適用于壓縮氣體壓縮氣體體。

The compressed gas of the pressure reducing valve of the imported locklock compressed gas cylinder in Germany is generally stored in the special high-pressure compressed gas cylinder. During use, the pressure of the compressed gas body is reduced to the pressure range required by the experiment or working condition through the pressure reducing valve, and then the compressed gas body is input into the use system through the fine adjustment of other control valves. The pressure reducing valve of the imported compressed gas cylinder is the pressure reducing valve that reduces the high pressure compressed gas in the cylinder to the pressure required by the experiment or working condition. The piston type pressure reducing structure is adopted, the output pressure is stable, which is mainly used for high input pressure requirements, and the maximum pressure is 6000 psig, which is suitable for compressed gas body.

三、進口壓縮氣體瓶減壓閥技術參數：

1、最大輸入壓力： 3000，6000psig，25Mpa

2、輸出壓力：0~250,0~500,0~1500,0~3000psig，0-20Mpa

3、安全測試壓力：1.5倍的最大進壓縮氣體壓力

4、適用溫度：-10℉~+165℉(-23℃~+74℃)

5、泄漏率：泡沫測試

6、CV值：0.06

1. Maximum input pressure: 30006000psig, 25MPa

2. Output pressure: 0 ~ 250,0 ~ 500,0 ~ 1500,0 ~ 3000psig, 0-20mpa

3. Safety test pressure: 1.5 times of the maximum compressed gas pressure

4. Applicable temperature: - 10 ° f to + 165 ° f (- 23 ° C to + 74 ° C)

5. Leakage rate: foam test

6、 CV value: 0.06

四、進口壓縮氣體瓶減壓閥材質： 

1、母體：316L，Brass

2、上蓋：316L，Brass

3、膜片：316L

4、過濾網：316L（10μm）

5、閥座：PCTFE，PTFE，Vespel

6、彈簧：316L

7、閥芯頂桿：316L

1. Maternal: 316L, brass

2. Upper cover: 316L, brass

3. Diaphragm: 316L

4. Filter screen: 316L (10 μ m)

5. Valve seat: PCTFE, PTFE, Vespel

6. Spring: 316L

7. Valve core ejector: 316L