壓重塊模具 U型壓重塊模具 石油管道專用

壓重塊模具是一種能夠進行拆卸的產品，而在施工的時候我們需要有很多次拆卸安裝的過程，所以有一些注意事項需要引起注意：首先，我們在鋼模板的安裝工作完成以后，需要檢查一下模具的尺寸大小以及垂直度情況，如果有不平整的情況出現的話，應該及時進行調整，同時還要做好相應的記錄工作，確保模具的構件之間的位置是標準的，而且還要注意連接件的緊固程度，這樣才能夠保證連接的緊密性，在施工的時候不會出現漏漿的情況；其次，U型壓重塊模具在拆除的時候要用手托住，不能出現磕碰的情況，否則會影響模具的尺寸精度，也會影響到下一次的使用效果。U型壓重塊模具的可拆卸性能夠?qū)崿F(xiàn)快速脫模，而且制作之前我們也會在模具的模板上面均勻的涂上一層脫模劑，讓表面光滑度得到提高，當進行振動的時候不會有水泥附著在上面，制作出來的U型壓重塊也是尺寸標準完整。

The weight pressing die is a kind of product that can be disassembled. During the construction, we need to have many disassembly and installation processes, so we need to pay attention to some precautions: first of all, we need to check the size and perpendicularity of the die after the installation of the steel formwork. If there is any irregularity, it should be timely carried out The adjustment shall be carried out, and the corresponding records shall be made to ensure that the position between the components of the mold is standard, and the fastening degree of the connecting parts shall be paid attention to, so as to ensure the tightness of the connection and avoid slurry leakage during the construction; secondly, the U-shaped weight pressing block mold shall be supported by hand when it is removed, without bumping, otherwise it will be affected The dimensional accuracy of the die will also affect the next use effect. The detachability of U-shaped weight block mold can realize rapid demoulding, and before manufacturing, we will evenly apply a layer of demoulding agent on the mold template to improve the surface smoothness. When vibrating, there will be no cement attached to it, and the U-shaped weight block produced is complete in size.

壓重塊模具 U型壓重塊模具 拼裝過程

壓重塊模具在拼裝之前要準備好相應的操作平臺，我們需要使用的操作平臺規格要和模具是相符合的，同時還要維持平穩安全，當進行拼裝的時候才能夠讓其過程更加順利。馬鞍式壓重塊模具的操作流程就是先要進行測量放線和基坑挖取的工作，只要前面的工程順利進行，我們才能將鋼模具運輸?shù)绞┕さ默F(xiàn)場進行安裝，當進行組裝鋼模板的工作的時候，我們要求基坑的附近不能堆放鋼模板，而且安裝的時候可以使用吊裝設備，讓其更加安全，支模的時候要使用到防護措施，進行矯正和固定之后才能夠進行連接件的安裝，我們在這個過程當中要嚴格按照施工的方案進行，采取固定的措施讓以后的澆筑更加穩妥。馬鞍式壓重塊模具安裝好以后還要進行一個檢查工作，現場需要有技術人員來進行監督驗收，在進行澆筑的時候要同時注意到其高度，以及我們澆筑的連續性，中途不能出現停止的情況。

Before the assembly of the weight pressing die, the corresponding operation platform shall be prepared. The specification of the operation platform we need to use shall be consistent with the die, and at the same time, the stability and safety shall be maintained. Only when the assembly is carried out can the process be more smooth. The operation process of saddle weight pressing die is to measure and set out the line and excavate the foundation pit first. As long as the front works are carried out smoothly, we can transport the steel die to the construction site for installation. When assembling the steel formwork, we require that the steel formwork shall not be stacked near the foundation pit, and hoisting equipment can be used for installation to make it more convenient Add safety. When erecting the formwork, the protective measures shall be used. After correction and fixation, the installation of the connecting parts can be carried out. In this process, we shall strictly follow the construction plan and take the fixed measures to make the later pouring more stable. After the saddle type weight pressing block mould is installed, an inspection shall be carried out. Technical personnel shall be available on site to supervise and accept it. When pouring, attention shall be paid to its height and the continuity of our pouring. It is not allowed to stop halfway.