The perlite separates the heat preservation board (FSG hatred water heat preservation board) is take the inflated pearlite bulk as an aggregate, joins the water-repellent and the cementing agent carries on the heat insulation waterproofing heat preservation board which working procedures and so on configuration, screening, compression formation, drying make. The FSG hatred water heat preservation board has solved each kind of building roofing heat preservation, the heat insulation and the waterproof function effectively in a body's technical difficult problem, saved the massive constructions and the service fund.product characteristic:The nature is light, and heat preservation heat insulation performance fine fire protection. Dustproof. Moisture-proof, does not distort the modification, not rottenly mildewy, the non-toxic tasteless hatred water performance to be good, hates Shui Lvke to reach above 98% to construct safely easy and feasible, the roofing and the wall surface glue may the natural ore be raw materials, has the good environment-protective.

粘貼：將中信巖能無機納米絕燃保溫板粘貼到主體墻面上，粘貼時要揉壓，不要直壓或硬壓，確保粘結漿料充滿所有孔隙并與主體100%満粘。同時注意與上下左右保溫層表面的平整度。打釘：待初凝后，用沖擊鉆在在每塊中信巖能無機納米絕燃保溫板 四角的兩邊8cm垂直交匯處打4個孔（直徑為6～8mm）至主體內大于2.5cm處，用長度大于6cm（根據保溫板的厚度決定錨釘?shù)拈L度）的帶塑料套的錨釘加固。然后整體鋪設網格布，做抗裂砂漿層。、既有建筑保溫節能改造應先清除原粉刷層,對舊墻松動、風化部位應剔鑿清除干凈,用1:2.5水泥漿料嵌牢補平.其它程序及做法均同新建房屋做中信巖能無機納米絕燃保溫板做法。（按施工規程要求施工）。

尹太銀生產的乳化瀝青珍珠巖是一種以乳化瀝青為膠結劑，與膨脹珍珠巖砂混合，在常溫下經攪拌加壓成型的新型保溫材料。它具有容重輕、保溫性能好、吸濕率低、冷作業施工易于保證質量等優點。它用作屋面保溫層，既可現澆又可預制。乳化瀝青膨脹珍珠巖主要用于異性設備、罐體，球體墻壁的保溫和隔音，具有施工方便，易操作。本產品不腐蝕設備，且無放射性，符合國家環保要求，是其它傳統保溫產品無法比擬的換代高效節能新材料。它是以瀝青為粘結劑的膨脹珍珠巖絕熱保溫板，包括石油瀝青膨脹珍珠巖保溫板和乳化瀝青膨脹珍珠巖保溫板兩種類型。膨脹珍珠巖的密度要求小于120 kg/m3。

無機保溫板具有無毒、阻燃、環保、抗壓強度大等特點,在建筑節能領域逐漸替代有機保溫板。本論文結合珍珠巖保溫板和巖棉保溫板的優勢將其進行多種復合,研究不同復合方式的工藝對復合保溫板的體積密度、導熱系數、抗壓強度以及孔隙率的影響,以制備滿足市場需要的無機復合保溫板。論文主要結論如下:以珍珠巖為骨料,通過調節巖棉、水玻璃和雙氧水的添加量制備了珍珠巖-巖棉復合保溫板,體積密度為196 kg/m3,導熱系數為0.0654 W?m-1?K-1,抗壓強度為0.58 MPa。以巖棉為骨料,通過調節珍珠巖、水玻璃和雙氧水的添加量制備了巖棉-珍珠巖復合保溫板,體積密度為224 kg/m3,導熱系數為0.0487 W?m-1?K-1,抗壓強度為0.70 MPa。采用珍珠巖-巖棉復合保溫板與巖棉-珍珠巖復合保溫板進行復合,結果表明:珍珠巖-巖棉保溫板厚度為7 mm、巖棉-珍珠巖保溫板厚度為18 mm時,制備的復合保溫板體積密度為0.204 kg/m3,