Potato refining and separating m achine is a kind of starch processing equipment, which takes fresh potato and dried potato as m ain raw m aterials and processes these raw m aterials into starch. It can complete three processes of crushing, refining and separating at one time. The m achine has s i m p l e structure, convenient operation, labor-saving and labor-saving. It is an ideal starch processing equipment.

Main points for m aintenance and repair of the whole m achine: lubricating oil and grease should be added to the drive bearings of sm all potato milling equipment, especially the oil cups at both ends of the m ain shaft of the grinding separator and the planer separator. Calcium based grease should be added once every 48 hours of operation, and the whole m achine should be m aintained regularly once a month;

All electrical equipment and driving belts on the single m achine of pulverizing unit shall not be wet or watered, so as to avoid short circuit or belt slipping accident; if the transmission belt is found to be slipping, the belt wheel gauge shall be adjusted in time to m ake the belt tight; the wire mesh under the screw of the cleaning m achine is easy to be da m aged after a certain period of time, and it shall be renewed after processing 500000 kg of fresh potatoes; the rack of the device on the shaving drum is used to m ake the belt tight After using for a period of time, if it is found that the production efficiency decreases and the powder slag becomes coarse, the rack should be removed and replaced with a new tooth on the other side for continuous use; after the potato flour milling unit is out of service, the whole m achine should be repaired and m aintained, and the bearing should be cleaned and filled with lubricating oil and grease. All electrical equipment should be provided with moisture-proof measures to avoid affecting the perform ance and service life of the equipment