對于5.5KW潛水渣漿泵的知識相信大家是有一定了解的，要想對其有更好的使用，應該做好日常維護工作，下面我們簡單了解：

1、潛水渣漿泵的吸入管路系統不允許有漏氣現象，進泵池隔柵應符合泵所能通過的顆粒要求，以免大顆粒物料或長纖維物料進入泵中造成堵塞。

2、要及時更換易投損件，維修裝配要正確，間隙調整合理，不得有緊澀磨擦現象。

3、5.5KW潛水渣漿泵軸承水壓、水量要滿足規定，隨時調整（或更換）填料的松緊程度，切勿造成軸封漏漿。并及時更換軸套。

4、更換軸承時，一定要保證軸承組件內無塵，潤滑油清潔，泵運行時軸承溫度一般以不超過60-650C為宜，zui高不超過750C.

5、要保證電機與潛水渣漿泵的同軸度，保證聯軸器中彈性墊完整正確，損壞后應及時更換。

6、保證泵組件和管路系統安裝正確，牢固可靠。

對于5.5KW潛水渣漿泵的日常維護知識了解了之后，相信會為大家?guī)砀蟮膸椭瑢τ谝陨系闹R就為大家介紹到這了。

5.5KW潛水渣漿泵的適用范圍：

主要用于冶金,礦山,火力發電等企業渣漿類液體的及輸送?，F(xiàn)在應用于鋼鐵,洗煤廠,采沙,   清淤等行業廣泛應用。

5.5KW潛水渣漿泵注意：

熱水潛水渣漿泵能輸送水溫100℃以內的高溫介質。根據用戶的要求可增加點擊的過熱保護裝置，能在惡劣工作條件下長期運行。

翻譯：

The scope of application of{Fine}:

Mainly used for metallurgical, mining, thermal power generation and other enterprises slag liquid removal and transport. It is now widely used in steel, coal washing plant, sand mining, dredging and other industries.

5.5KW潛水渣漿泵泵頭專業的稱謂是泵體和泵蓋。泵在運行中除監控流量、壓力外，還要監控電機不要超過電機的額定電流。一般渣漿泵的所謂泵頭應該包含泵體和泵蓋部分。泵體主要連接的是泵的轉子，通過軸承將葉輪，密封，軸承組件連接起來。泵蓋是和泵體對應的部門，與泵蓋共同組成一個封閉的腔體。泵體與泵蓋內部是渣漿泵的內襯。內襯的材質一般有橡膠和高鉻合金，一般根據根絕工礦條件選擇泵的內襯是橡膠還是金屬合金。

5.5KW潛水渣漿泵

Hebei Huiquan's main submersible sand pump, Qingyang submersible sand pump, is widely used, but its correct application is very important. Due to the limitation of the name itself, some people outside the industry misunderstand this. In fact, impurity pumps, dredging pumps, dredging pumps, etc. are all used in the scope of application of slurry pumps. In the application process of slurry pump, we must pay attention to reasonable design, correct calculation and appropriate type selection, which are very important. Submersible pump can be widely used in mines, electric power, metallurgy, coal, environmental protection and other industries to transport abrasive slurry containing solid particles. For example, slurry transportation in metallurgical mineral processing factories and mines, hydraulic ash removal in thermal power plants, coal slurry and heavy medium transportation in coal washing plants, river dredging, river dredging, etc. In the chemical industry, some corrosive slurry containing crystals can also be transported.