進口動態平衡電動調節閥德國洛克

一、進口動態平衡電動調節閥描述：

德國LOCKE洛克進口動態平衡電動調節閥是動態平衡與電動調節一體化的產品，主要適用于暖通空調系統末端空調設備（如空調箱、新風機組、空氣處理機）的溫度控制，通過配置智能模塊控制裝置，可方便的對各環路的流量、溫度進行自動控制，實現合理利用能量，節能降耗，智能化管理。應用此閥使末端設備只受標準控制信號的影響，而不受系統壓力波動的影響，使系統調節更穩定、更節能，特別適用于系統負荷變化較大的變流量系統中。

The dynamic balance electric control valve imported from Germany Locke is an integrated product of dynamic balance and electric regulation. It is mainly applicable to the temperature control of terminal air conditioning equipment (such as air conditioning box, fresh air unit and air processor) of HVAC system. Through the configuration of intelligent module control device, it is convenient to automatically control the flow and temperature of each loop, and realize the reasonable utilization of energy , energy saving and consumption reduction, intelligent management. The application of this valve makes the terminal equipment only affected by the standard control signal, not by the system pressure fluctuation, so that the system regulation is more stable and more energy-saving, especially suitable for the variable flow system with large load variation.

二、進口動態平衡電動調節閥技術參數： 

Nominal pressure: pn1.0-32.0mpa, ANSI class 150-1500lb, jis10-20k

Nominal diameter: DN 10-500, NPs 1 / 2-36“

Connection mode: flange, butt welding, thread, etc

Applicable temperature - 196 ℃～ 700 ℃

Driving mode: Electric

Valve body materials: WCB, zg1cr18ni9ti, zg1cr18ni12mo2ti, CF8 (304), CF3 (304L), CF8M (316), cf3m (316L), Ti

Applicable media: water, steam, oil, nitric acid, acetic acid, oxidizing medium, urea and other media

This kind of valve should be installed horizontally in the pipeline

三、進口動態平衡電動調節閥主要特點：

1.驅動器為直行程，互換性好。

2.流量特性曲線：線/等百分比

3.流量誤差≤5%

4.工作溫度：0--150℃

5.穩定：末端設備的流量變化不受系統壓力波動的影響，流量變化不相互干擾。

6.節能：較傳統的系統節能6-20%。

7.高效：大大地縮短了調試時間，系統運行具有高效率。

8.舒適：調控溫度精度更高，比傳統變流量系統更舒適。  

1. The actuator is of straight stroke, with good interchangeability.

2. Flow characteristic curve: Line / equal percentage

3. Flow error ≤ 5%

4. Working temperature: 0 -- 150 ℃

5. Stability: the flow change of terminal equipment is not affected by system pressure fluctuation, and the flow change does not interfere with each other.

6. Energy saving: 6-20% energy saving compared with the traditional system.

7. High efficiency: the debugging time is greatly shortened, and the system runs with high efficiency.

8. Comfort: the temperature control accuracy is higher, and it is more comfortable than the traditional variable flow system.

四、進口動態平衡電動調節閥工作原理：

進口動態平衡電動調節閥是德國洛克自主設計、開發、制造的一款產品，用于調節介質的流量、壓力和液位。根據調節部位信號，自動控制閥門的開度，從而達到介質流量、壓力和液位的調節。動態平衡電動調節閥由電動執行機構或氣動執行機構和調節閥兩部分組成。調節并通常分為直通單座式和直通雙座式兩種，后者具有流通能力大、不平衡力小和操作穩定的特點，所以通常特別適用于大流量、高壓降和泄漏少的場合。閥門是流體輸送系統中的控制部件，具有截止、調節、導流、防止逆流、穩壓、分流或溢流泄壓等功能。用于流體控制系統的閥門，從最簡單的截止閥到極為復雜的自控系統中所用的各種閥門，其品種和規格相當繁多。閥門可用于控制空氣、水、蒸汽、各種腐蝕性介質、泥漿、油品、液態金屬和放射性介質等各種類型流體的流動。閥門的公稱通經從幾mm 的儀表針型閥到10m 的工業管路用閥。閥門的工作壓力可從1.3×10－3MPa 到1000MPa 的超高壓。工作溫度從－269℃的超低溫到1430℃的高溫。閥門的啟閉可采用多種控制方式，如手動、氣動、電動、液動、電-氣或電-液聯動及電磁驅動等；也可在壓力、溫度或其他形式傳感信號的作用下，按預定的要求動作，或者只進行簡單的開啟或關閉。

Imported dynamic balance electric control valve is a product independently designed, developed and manufactured by Germany rock, which is used to regulate the flow, pressure and liquid level of medium. According to the signal of the regulating position, the opening of the valve is automatically controlled, so as to adjust the medium flow, pressure and liquid level. Dynamic balance electric control valve consists of electric actuator or pneumatic actuator and regulating valve. The latter has the characteristics of large flow capacity, small unbalance force and stable operation, so it is usually suitable for large flow rate, high pressure drop and less leakage. The valve is the control component in the fluid transportation system, which has the functions of cut-off, regulation, diversion, prevention of countercurrent, pressure stabilization, shunt or overflow pressure relief. The valve used in fluid control system, from the simplest stop valve to the most complex automatic control system, has a wide variety of varieties and specifications. The valve can be used to control the flow of air, water, steam, various corrosive media, mud, oil, liquid metal and radioactive medium. The nominal diameter of the valve ranges from several mm instrument needle valve to 10m industrial pipeline valve. The working pressure of the valve can be from 1.3 × 10-3mpa to 1000MPa. The working temperature ranges from - 269 ℃ to 1430 ℃. The valve can be opened and closed by various control methods, such as manual, pneumatic, electric, hydraulic, electro pneumatic or electro-hydraulic linkage and electromagnetic drive, etc.; it can also act according to predetermined requirements under the action of pressure, temperature or other forms of sensing signals, or simply open or close.