進口比例積分電動調節閥質量就是好德國洛克《DE LOCKE》

一、進口比例積分電動調節閥描述：

德國《LOCKE》洛克進口比例積分電動調節閥QS系列閥門驅動器為內置24V/AC雙向可逆馬達直行程驅動器，能接受與反饋0-10V或4-20mA控制訊號，與KT/KTF系列閥體配套使用提供比例式控制，實現管道中介質流量的調節功能。廣泛應用于空調、采暖等系統中，亦可通過不同的連接器與其它閥門配套使用。驅動器垂直安裝于閥體上，不可安裝在閥體下面，需留出足夠的空間以便日常維護。

The QS series valve driver of proportional integral electric control valve imported from Germany "locke" is a built-in 24 V / AC bidirectional reversible motor direct stroke driver, which can receive and feedback 0-10V or 4-20mA control signal. It is used with kt / KTF series valve body to provide proportional control and realize the regulation function of pipeline medium flow. It is widely used in air conditioning, heating and other systems. It can also be used with other valves through different connectors. The actuator should be installed vertically on the valve body, not under the valve body. Enough space should be reserved for routine maintenance.

二、進口比例積分電動調節閥結構特點：

★執行器選用鑄鋁支架及塑料外殼，體積小、重量輕

★選用永磁同步電機，并帶有磁滯離合機構，具有可靠的自我保護功能

★適合多種控制信號：增量（浮點）、電壓（0～10V）、電流（4～20mA）

★具有0～10V或4～20mA反饋信號（選配）

★傳動齒輪采用金屬齒輪，大大提高了驅動器的使用壽命

★功耗低、輸出扭力大、噪音小

★現場安裝方便。

★閥體有螺紋連接和法蘭連接兩種，安裝方便，其構造符合IEC國際標準

★閥體有鑄銅、鑄鐵、鑄鋼、不銹鋼多種材質可供選擇，以適合不同工作介質及溫度的要求

★閥體結構形式有兩通閥（單座）、兩通平衡閥（平衡式）、三通合流和三通分流閥

The actuator adopts cast aluminum bracket and plastic shell, which is small in size and light in weight

The permanent magnet synchronous motor with hysteresis clutch mechanism has reliable self-protection function

Suitable for various control signals: increment (floating point), voltage (0-10V), current (4-20mA)

With 0-10V or 4-20mA feedback signal (optional)

The transmission gear adopts metal gear, which greatly improves the service life of the driver

Low power consumption, high output torque and low noise

It is convenient to install on site.

The valve body has threaded connection and flange connection, which is easy to install and its structure conforms to IEC international standard

The valve body can be made of cast copper, cast iron, cast steel and stainless steel to meet the requirements of different working medium and temperature

There are two-way valve (single seat), two-way balance valve (balanced type), three-way combined flow and three-way shunt valve

三、進口比例積分電動調節閥工作原理：

電動比例調節閥在控制形式上是通過閥門開啟角度大小來實現控制開度和截面面積?？刂七^程是在電機轉動過程中，不斷以線性電阻值反饋給控制單元，控制單元根據測量值和電動調節閥的反饋電阻值進行比對和判斷，發出控制信號到達目標位置即刻停止動作的原理。

Electric proportional control valve in the control form is through the valve opening angle to control the opening and cross-sectional area. The control process is that in the process of motor rotation, the linear resistance value is continuously fed back to the control unit. The control unit compares and judges the measured value with the feedback resistance value of the electric control valve, and sends out the control signal to stop the action immediately when it reaches the target position.

四、進口比例積分電動調節閥技術參數： 

Nominal pressure: 1.6Mpa 2.5MPa 4.0Mpa

Travel range: 40mm

Flow characteristics are equal linear or equal percentage

Medium: cold / hot water, steam, glycol, etc

Valve diameter: dn25-dn450

Medium temperature: 0-120 ℃, 0-170 ℃, 0-380 ℃

Valve body material: cast steel or cast iron

Stem material: 1cr18n19 (aisi302) Ф 9 stainless steel

Stem seal PTFE retaining ring + NBR

Leakage less than 0.03% of Kv value

Working temperature - 10 ℃ - 70 ℃, 0% - 95% RH, no condensation

Storage temperature - 20 ℃ - 85 ℃