進口電動多級調節閥德國洛克質量?jī)?yōu)異 價格美麗

一、進口電動多級調節閥描述：

德國《LOCKE》洛克進口電動多級調節閥采用的是多級籠式套筒閥芯或軸流迷宮型閥芯，多級減壓，完全控制流過閥內的介質的流速，大幅度的降低了高壓氣體或者蒸汽在閥內產生的噪音，穩定的多級別降壓有效使液體不會產生氣蝕，是使用在高壓介質場所性能穩定的控制閥。

電動執行機構為一體化結構，內有伺服放大器,輸入控制信號(4～20mADC或1～5VDC)及電源即可控制閥門開度，達到對壓力、流量、液位、溫度等工參數的調節。電動多級調節閥整體具有動作靈敏、連線簡單、流量大、體積小、調節精度高等特點。

Germany "locke" imported electric multi-stage control valve adopts multi-stage cage sleeve valve core or axial-flow labyrinth valve core. It can fully control the flow rate of medium flowing through the valve, greatly reduce the noise generated by high-pressure gas or steam in the valve. The stable multi-level pressure reduction effectively prevents the liquid from cavitation. It has stable performance when used in high-pressure medium Control valve.

The electric actuator is an integrated structure with servo amplifier. The valve opening can be controlled by inputting control signal (4 ~ 20mADC or 1 ~ 5VDC) and power supply, so as to adjust the working parameters such as pressure, flow, liquid level and temperature. The electric multi-stage control valve has the characteristics of sensitive action, simple connection, large flow, small volume and high regulation accuracy.

二、進口電動多級調節閥設計特點及應用：

設計特點

◆ 高壓差范圍內連續調節

◆ 套筒結構為多孔籠式，嚴格按所需調節特性排列，調節性能好。

◆ 閥芯上下均設有導向，調節平衡，無振動，自清能力強。

◆ 閥芯可設計為平衡事和非平衡式，平衡式在平衡孔處設有密封圈，非平衡式使用錐面密封，密封效果好。。

◆ 介質軸向流動，經過多級節流盤逐漸降壓，在承受大壓差時抗汽蝕，噪音低。

◆ 閥座為錐形密封面，在閥門關閉時，實現可靠密封。

◆ 密封面堆焊硬質合金，閥芯（桿）表面噴涂硬質合金材料，耐沖蝕，壽命長。

應用

◆ 汽機高壓內、外缸導管，主調節閥等疏水。

◆ 汽機中壓缸、中壓調節閥、低壓缸以及各抽氣系統疏水。

◆ 鍋爐過熱器噴水減溫。

◆ 高壓旁路、各種減溫系統高壓差噴水。

◆ 給水再循環、給水旁路閥、定期排污系統等。

◆ 其他高壓差環境下介質調節。

Design features

Continuous adjustment within the range of high pressure difference

The sleeve structure is porous cage type, arranged strictly according to the required adjustment characteristics, with good adjustment performance.

The upper and lower parts of the valve core are equipped with guide, adjusting balance, no vibration and strong self-cleaning ability.

The valve core can be designed as balanced type and non-equilibrium type. The balanced type has a sealing ring at the balance hole, and the non-equilibrium type uses conical surface sealing, which has good sealing effect..

The medium flows in axial direction, and gradually depressurizes after multi-stage throttle disc. It can resist cavitation when bearing large pressure difference and has low noise.

The valve seat has a conical sealing surface to achieve reliable sealing when the valve is closed.

The sealing surface is overlaid with cemented carbide, and the surface of valve core (rod) is sprayed with cemented carbide material, which is erosion resistant and has long service life.

application

Drain water from high pressure inner and outer cylinder pipes and main control valve of steam turbine.

Drain water from IP cylinder, IP control valve, LP cylinder and each extraction system.

Water spray desuperheating of boiler superheater.

High pressure bypass and various desuperheating systems spray water with high pressure difference.

Feed water recirculation, feed water bypass valve, periodic blowdown system, etc.

Other media adjustment under high pressure difference environment.

三、進口電動多級調節閥技術參數及性能：

閥內部件：