品種齊全

質量可靠

專業團隊

交貨準時

產品特點

公司介紹

水泥矩形槽模具是一種新型的鋼模具，該種鋼模具一經推出就被許多生產水槽預制件廠家的所親睞，之前生產水泥矩形槽模具   預制矩形槽模具 有塑料模具、玻璃模具等，但是隨著社會生產力的提高，新型的鋼模具已經問世，水泥矩形槽模具 在使用起來既省時又省力還省錢，因為一套模具進行拆卸后還可以進行多次的循環使用，這種鋼模具突出的優勢就在于它的使用壽命長，另一點就是能充分滿足預制件生產廠家的拆卸方面的要求，大大提高了廠家的生產效率，在保證生產效率的同時還是保證預制件的產品質量，重要的是保證好廠家的生產成本，該模具在使用起來很簡單，將水泥矩形槽模具組裝完成后，刷上油直接模內灌漿就行，不需要很高的技術含量，等待泥漿成型后將模板些掉即可，并不會因為生產技術上的問題導致預制件的制作失敗，水泥矩形槽模具從而增加廠家的生產成本，但是這種模具在脫模時是需要機械來進行輔助脫模的，因為該種模具較大，并且在脫模時與其他模具不同之處是要用機械直接將預制件從內模上吊裝出來即可完成脫模。Cement rectangular groove mold is a new type of steel mold. Once launched, this kind of steel mold has been favored by many manufacturers producing prefabricated parts of water tank. Previously, cement rectangular groove mold and prefabricated rectangular groove mold have plastic mold and glass mold. However, with the improvement of social productivity, new steel mold has come out, The cement rectangular groove mold can save time, labor and money in use, because a set of mold can be recycled for many times after disassembly. The outstanding advantage of this steel mold lies in its long service life. On the other hand, it can fully meet the disassembly requirements of the manufacturer of prefabricated parts and greatly improve the production efficiency of the manufacturer, While ensuring the production efficiency, it is also important to ensure the product quality of prefabricated parts. The important thing is to ensure the production cost of the manufacturer. The mold is very simple to use. After the cement rectangular groove mold is assembled, it can be brushed with oil and grouted directly in the mold. There is no need for high technical content. Just wait for the mud to form and remove the formwork, The manufacturing failure of prefabricated parts will not be caused by production technical problems, and the cement rectangular groove mold will increase the manufacturer's production cost, but this kind of mold needs machinery to assist in demoulding, because this kind of mold is large, And the difference between demoulding and other molds is that the prefabricated parts should be directly hoisted from the inner mold by machinery to complete demoulding.

01

02

03

04