混凝土隔離墩模具是依據當前在公路施工中使用的混凝土隔離墩具體樣式、尺寸加工的，因?yàn)楦綦x墩的生產不同于防撞墻，都是按照預制方式操作的，所以模具也可以看成是五面體。在制作時需要按照一定的操作流程才能制作出合格的隔離墩，否則會導致其不合格。

使用方式：

首先應該在使用前先檢查模具表面是否完好平整，因?yàn)榛炷粮綦x墩模具表面的光滑與否是決定隔離墩的表面是否平整的主要因素，因?yàn)楦綦x墩需要在外面刷漆起到警示的作用，如果表面不光滑，美觀性就會受到嚴重影響，不利于道路美化。檢查完成后要對模具上的污泥進行清理，因?yàn)槲勰鄷?huì)嚴重影響到產品的堅實程度，在承受來自道路上行駛的汽車的沖擊力時不能保持原有的形狀，這樣就沒有起到隔離人群的作用，對人民的生命財產造成不必要的損失。清理后的模具要進行安裝，混凝土隔離墩模具安裝時要使用螺絲，連接的緊實，不要有縫隙，這樣在灌料時才不會出現漏漿的現象，否則會浪費了原料而無法得到產品。安裝完成后要進行刷油，刷油主要是起到方便脫模操作，提率，也對隔離墩模具起到一定的保護作用。接下來便是灌料，在灌料時應該將振動棒插入到原料中，這樣有利于氣體的排出，在產品中才不會有很多的氣泡，影響產品的堅實程度。The mold of concrete isolation pier is processed according to the specific style and size of concrete isolation pier currently used in highway construction. Because the production of isolation pier is different from the anti-collision wall, it is operated according to the prefabrication mode, so the mold can also be regarded as a pentahedron. In the production, we need to follow a certain operation process in order to make a qualified isolation pier, otherwise it will lead to disqualification.

Usage:

First of all, the mold surface should be checked before use, because the smoothness of the mold surface of the concrete isolation pier is the main factor to determine whether the surface of the isolation pier is smooth, because the isolation pier needs to be painted outside to play a warning role. If the surface is not smooth, the aesthetics will be seriously affected, which is not conducive to road beautification. After the inspection, it is necessary to clean up the sludge on the mold, because the sludge will seriously affect the firmness of the product, and the original shape can not be maintained when bearing the impact from the car driving on the road, so it does not play the role of isolating the crowd, causing unnecessary losses to people's lives and property. The cleaned mold should be installed, and the concrete isolation pier mold should be installed with screws. The connection should be tight and there should be no gap, so that there will be no slurry leakage during filling, otherwise raw materials will be wasted and products will not be obtained. After the completion of the installation, it is necessary to brush oil, which is mainly to facilitate the demoulding operation, improve the efficiency and protect the mold of the isolation pier. The next step is filling. When filling, the vibrator should be inserted into the raw material, which is conducive to the discharge of gas, so that there will not be many bubbles in the product, which will affect the firmness of the product.