特性一覽

• 4路CoaXPress CXP-3 連接：1,250 MB/s 相機帶寬
• 將4路相機連接到一張卡
• 可搭配使用超長的相機電纜（100多米）
• PCIe 2.0 (Gen 2) x4 總線：傳輸帶寬 1,700 MB/s
• 豐富的相機控制功能
• Memento 事件日志工具

Mechanical Format Standard profile, half length, 4-lane PCI Express card Cooling method Air cooling, fan-cooled heatsink Mounting For insertion in a standard height, 4-lane or higher, PCI Express card slot Connectors 'A', 'B', 'C', 'D' on bracket: 4x DIN 1.0/2.3 female connectors CoaXPress host interface 'DA', 'DB', 'DC', 'DD' on bracket: 4x DIN 1.0/2.3 female connectors CoaXpress data forwarding interface 'INTERNAL I/O 2' on PCB: 26-pin 2-row 0.1" pitch pin header with shrouding I/O lines and power output 'AUXILIARY POWER INPUT' on module: 6-pin PEG power socket 12 VDC power input for PoCXP camera(s) and I/O 'C2C-LINK' on module: 6-pin 2-row 0.1-in header Card to card link LED indicators 'A', 'B', 'C', 'D' on bracket: Bi-color red/green LEDs CoaXPress Host connector indicator 'FPGA STATUS LAMP' on PCB: Bi-color red/green LED FPGA status indicator 'BOARD STATUS LAMP' on PCB: Bi-color red/green LED Board status indicator Switches 'RECOVERY' on card PCB: 3-pin 1-row 0.1" header Firmware emergency recovery Dimensions L 167.65 mm x H 111.15 mm L 6.6 in x H 4.38 in Host bus Standard PCI Express 3.0 Link width 4 lanes 1 lane or 2 lanes with reduced performance Link speed 8.0 GT/s (PCIe 3.0) 5.0 GT/s (PCIe 2.0) with reduced performance Maximum payload size 512 bytes DMA 32- and 64-bit Peak delivery bandwidth 3,900 MB/s Effective (sustained) delivery bandwidth 3,350 MB/s (Host PC motherboard dependent) Power consumption Typ. 16.8 W (3.8 W @ +3.3V, 13 W @ +12V), excluding camera and I/O power output Camera / video inputs Interface standard(s) CoaXPress 1.0, 1.1 and 1.1.1 Connectors Four DIN1.0/2.3 75 Ohms CXP-6 Status LEDs One CoaXPress Host connection status LED per connection Number of cameras Area-scan cameras: One 1- or 2- or 4-connection camera Line-scan cameras: One 1- or 2- or 4-connection camera Maximum aggregated camera data transfer rate 25 Gbit/s (2,500 MB/s) Supported CXP down-connection speeds 1.25 GT/s (CXP-1), 2.5 GT/s (CXP-2), 3.125 GT/s (CXP-3), 5 GT/s (CXP-5), and 6.25 GT/s (CXP-6) Number of CXP data streams (per camera) 1 data stream per camera Maximum CXP stream packet size 16,384 bytes PoCXP (Power over CoaXPress) PoCXP Safe Power: 17 W of 24V DC regulated power per CoaXPress connector PoCXP Device detection and automatic power-on Overload and short-circuit protections On-board 12V to 24V DC/DC converter A +12V power source must be connected to the AUXILIARY POWER INPUT connector using a 6-pin PEG cable Camera types Area-scan cameras: Grayscale and color (YCbCr, YUV, RGB and Bayer CFA) Single-tap (1X-1Y) progressive-scan Line-scan cameras and contact imaging sensors: Grayscale and color RGB Camera pixel formats supported Raw, Monochrome, Bayer, RGB, and RGBA (PFNC names): Raw Mono8, Mono10, Mono12, Mono14, Mono16 BayerXX8, BayerXX10, BayerXX12, BayerXX14, BayerXX16 where XX = GR, RG, GB, or BG RGB8, RGB10, RGB12, RGB14, RGB16 RGBA8, RGBA10, RGBA12, RGBA14, RGBA16 YCbCr601_422_8, YCbCr601_422_10 YCbCr709_422_8, YCbCr709_422_10 YUV422_8, YUV422_10 Area-scan camera control Trigger Precise control of asynchronous reset cameras, with exposure control. Support of camera exposure/readout overlap. Support of external hardware trigger, with optional delay and trigger decimation. Strobe Accurate control of the strobe position for strobed light sources. Support of early and late strobe pulses. Line-scan camera control Scan/page trigger Precise control of start-of-scan and end-of-scan triggers. Support of external hardware trigger, with optional delay. Support of infinite acquisition, without missing line, for web inspection applications. Line trigger Support for quadrature motion encoders, with programmable noise filters, selection of acquisition direction and backward motion compensation. Rate Converter tool for fine control of the pixel aspect ratio: Rate Conversion Ratio in the range 0.001 to 1000 with an accuracy better than 0.1%. Rate Divider tool Line strobe Accurate control of the strobe position for strobed light sources. On-board processing On-board memory 1 GB Mechanical Format Standard profile, half length, 4-lane PCI Express card Cooling method Air cooling, fan-cooled heatsink Mounting For insertion in a standard height, 4-lane or higher, PCI Express card slot Connectors 'A', 'B', 'C', 'D' on bracket: 4x DIN 1.0/2.3 female connectors CoaXPress host interface 'EXTERNAL I/O' on bracket: 26-pin 3-row high-density female sub-D connector I/O lines and power output 'INTERNAL I/O 1' and 'INTERNAL I/O 2' on PCB: 2x 26-pin 2-row 0.1" pitch pin header with shrouding I/O lines and power output 'AUXILIARY POWER INPUT' on module: 6-pin PEG power socket 12 VDC power input for PoCXP camera(s) and I/O power 'C2C-LINK' on module: 6-pin 2-row 0.1-in header Card to card link LED indicators 'A', 'B', 'C', 'D' on bracket: Bi-color red/green LEDs CoaXPress Host connector indicator 'FPGA STATUS LAMP' on PCB: Bi-color red/green LED FPGA status indicator 'BOARD STATUS LAMP' on PCB: Bi-color red/green LED Board status indicator Switches 'RECOVERY' on card PCB: 3-pin 1-row 0.1" header Firmware emergency recovery Dimensions L 167.65 mm x H 111.15 mm L 6.6 in x H 4.38 in Weight 170 g, 6.00 oz Host bus Standard PCI Express 2.0 Link width 4 lanes 1 lane or 2 lanes with reduced performance Link speed 5.0 GT/s (PCIe 2.0) 2.5 GT/s (PCIe 1.0) with reduced performance Maximum payload size 512 bytes DMA 32- and 64-bit Peak delivery bandwidth 2,000 MB/s Effective (sustained) delivery bandwidth 1,700 MB/s (Host PC motherboard dependent) Power consumption Typ. 12.1W ( 2.5 W @ +3.3V, 9.6 W @ +12V), excluding camera and I/O power output Camera / video inputs Interface standard(s) CoaXPress 1.0, 1.1 and 1.1.1 Connectors Four DIN1.0/2.3 75 Ohms CXP-3 Status LEDs One CoaXPress Host connection status LED per connection Number of cameras Up to four 1-connection cameras Maximum aggregated camera data transfer rate 12.5 Gbit/s (1,250 MB/s) Supported CXP down-connection speeds 1.25 GT/s (CXP-1), 2.5 GT/s (CXP-2), 3.125 GT/s (CXP-3) Number of CXP data streams (per camera) 1 data stream per camera Maximum CXP stream packet size 8,192 bytes PoCXP (Power over CoaXPress) PoCXP Safe Power: 17 W of 24V DC regulated power per CoaXPress connector PoCXP Device detection and automatic power-on Overload and short-circuit protections On-board 12V to 24V DC/DC converter A +12V power source must be connected to the AUXILIARY POWER INPUT connector using a 6-pin PEG cable Camera types Grayscale Color (RGB and Bayer CFA) Camera pixel formats supported Raw, Monochrome, Bayer, RGB, and RGBA (PFNC names): Raw Mono8, Mono10, Mono12, Mono14, Mono16 BayerXX8, BayerXX10, BayerXX12, BayerXX14, BayerXX16 where XX = GR, RG, GB, or BG RGB8, RGB10, RGB12, RGB14, RGB16 RGBA8, RGBA10, RGBA12, RGBA14, RGBA16 YCbCr601_422_8, YCbCr601_422_10 YCbCr709_422_8, YCbCr709_422_10 YUV422_8, YUV422_10 Area-scan camera control Trigger Precise control of asynchronous reset cameras, with exposure control. Support of camera exposure/readout overlap. Support of external hardware trigger, with optional delay and trigger decimation. Strobe Accurate control of the strobe position for strobed light sources. Support of early and late strobe pulses. On-board processing On-board memory 1 GB