用于單個基本配置 Camera Link 相機的圖像采集卡

特性一覽

• 連接1路Camera Link Base 或Lite 配置相機
• 直接兼容市場上數以百計的 Camera Link 相機
• 支持 PoCL，通過 Camera Link 供電
• ECCO：延長的 Camera Link 線纜長度
• PCIe x1 總線：200 MB/s 持續傳輸帶寬
• 特征豐富的 10 條數字 I/O 線
• Memento 事件日志工具

Mechanical
Format	Low profile, half length, 1-lane PCI Express card
Cooling method	Air-cooling, fanless
Mounting	For insertion in a low-profile or standard height, 1-lane or higher, PCI Express card slot
Connectors	'A' on bracket: 26-position Shrunk Delta Ribbon (SDR) socket Camera Link Base connector 'EXTERNAL I/O' on standard bracket: 25-pin 2-row female sub-D connector I/O lines and power output 'INTERNAL I/O' on PCB: 26-pin 2-row 0.1" pitch pin header with shrouding I/O lines and power output 'POWER INPUT' on module: 4-pin MOLEX power socket 12 VDC power input for PoCL camera and I/O power
Dimensions	L 167.65 mm x H 68.90 mm L 6.6 in x H 2.71 in
Weight	98 g, 3.46 oz
Host bus
Standard	PCI Express 1.0
Link width	1 lane
Link speed	2.5 GT/s (PCIe 1.0)
Maximum payload size	1024 bytes
DMA	32- and 64-bit
Peak delivery bandwidth	256 MB/s
Effective (sustained) delivery bandwidth	Up to 200 MB/s for a PCI Express payload size of 256 bytes Up to 180 MB/s for a PCI Express payload size of 128 bytes
Power consumption	Max. 4.5 W; Typ. 3.8 W (0.34 A @ 3.3V;0.22 A @+12V)
Camera / video inputs
Interface standard(s)	Camera Link 2.0
Connectors	One Shrunk Delta Ribbon (SDR) Miniature Camera Link (MiniCL)
ECCO - Extended Camera Link Cable Operation	ECCO
Number of cameras	One Base or Lite camera
Maximum aggregated camera data transfer rate	2.04 Gbit/s (255 MB/s)
Camera Link configuration	Base or Lite
Camera Link clock frequency	From 20 MHz up to 85 MHz
PoCL (Power over Camera Link)	One PoCL SafePower compliant controller with overload, over-voltage and short-circuit protection
Camera types	Grayscale and color (RGB and Bayer) cameras Area-scan and line-scan cameras
Area-scan camera control
Trigger	Precise control of asynchronous reset cameras, with exposure control. Support of camera exposure/readout overlap. Support of external hardware trigger, with optional delay and trigger decimation.
Strobe	Accurate control of the strobe position for strobed light sources. Support of early and late strobe pulses.
Line-scan camera control
Scan/page trigger	Precise control of start-of-scan and end-of-scan triggers. Support of external hardware trigger, with optional delay. Support of infinite acquisition, without missing line, for web inspection applications.
Line trigger	Support for quadrature motion encoders, with programmable noise filters, selection of acquisition direction and backward motion compensation. Rate Converter tool for fine control of the pixel aspect ratio. Rate Divider tool
Line strobe	Accurate control of the strobe position for strobed light sources.
On-board processing
On-board memory	64 MB (32 MB for image data)