進口不銹鋼閘閥認準德國洛克

進口不銹鋼閘閥結構特點：

1、結構緊湊、設計合理、閥門剛性好、通道流暢，流量系數小

2、密封面采用不銹鋼和硬質合金，使用壽命長

3、采用柔性石墨填料、密封可靠，操作輕便靈活

4、驅動方式為手動、氣動、電動、齒輪傳動

5、結構形式為彈性楔式單閘板、剛性楔式單閘板雙閘板型式

進口不銹鋼閘閥規格參數：

公稱通徑：DN15-50mm

公稱壓力：PN1.0-1.6MPa

適用介質：水、油、污水、酸堿

適用溫度：≤180℃

材質：不銹鋼304.316.316L

進口不銹鋼閘閥零件材料：

零件名稱         ZG1Cr18Ni9Ti CF8     ZG00Cr18Ni10 CF3       ZG1Cr18Ni12Mo2TiCF8M      ZG00Cr17Ni14Mo2 CF3M

閥體/閥蓋        0Cr18Ni9             00Cr18Ni10             0Cr18Ni9Mo2               00Cr18Ni10Mo2

閘板             0Cr18Ni9             00Cr18Ni10             0Cr18Ni9Mo2               00Cr18Ni10Mo2

閥桿             0Cr18Ni9             00Cr18Ni10             0Cr18Ni9Mo2               00Cr18Ni10Mo2

閥桿螺母         鋁青銅

填料             PTFE編織             PTFE編織               PTFE編織                  PTFE編織

墊片             304+PTFE             304L+PTFE              316+PTFE                  316L+PTFE

壓蓋             0Cr18Ni9             00Cr18Ni10             0Cr18Ni9Mo2               00Cr18Ni10Mo2

進口不銹鋼閘閥產品簡介：

德國洛克《DE LOCKE》不銹鋼法蘭閘閥又稱閘板閥或閘門閥，應用最廣泛的一種閥門。它是通過閘板的升降來控制閥門的啟閉，閘板垂直于流體方向，改變閘板與閥座間相對位置即可改變通道大小。適用于公稱壓力PN1.6～16.0MPa,工作溫度≤-29℃～550℃的石油、化工、水力、火力電站各種系統的管路上，切斷或接通管路介質。適用介質為：水、油品、蒸氣、及酸、堿、氨、尿素、含硫天燃?xì)獾?。操作方式有：手?dòng)、齒輪傳動、電動、氣動等。

German Locke "de Locke" stainless steel flange gate valve, also known as gate plate valve or gate valve, is one of the most widely used valves. It is through the rise and fall of the gate to control the opening and closing of the valve, the gate is perpendicular to the fluid direction, changing the relative position between the gate and the valve seat can change the channel size. It is suitable for cutting off or connecting pipeline medium in petroleum, chemical, hydraulic and thermal power plants with nominal pressure of pn1.6 ~ 16.0mpa and working temperature of - 29 ℃ ~ 550 ℃. Applicable media: water, oil, steam, acid, alkali, ammnia, urea, sulfur-containing natral gas, etc. Operation mode: manual, gear drive, electric, pneumatic, etc.