進口螺紋疏水閥外觀精美-德國洛克

進口螺紋疏水閥特點：

1.外形精美,設計緊湊。

2.不銹鋼閥體和內件,經久耐用。

3.高精磨閥片和閥座延長了使用壽命。

4.易于保養維修。

適用于：低.中.高壓力和溫度范圍內的蒸汽主管和小型設備等。

進口螺紋疏水閥規格參數：

1、公稱壓力：PN42

2、閥門規格：DN8-DN25

3、介質溫度：200℃-400℃

4、連接形式：螺紋

5、閥體材料：CF8

6、環境溫度：200℃-400℃

7、工作壓力：0.15-4.2Mpa

8、工作溫度：400℃

進口螺紋疏水閥工作原理:

進口內螺紋疏水閥工作原理：1、當設備剛啟動時，管道內出現空氣和冷凝水，此時浮球在雙金屬片的支撐下遠離閥,閥口打開，空氣和冷凝水迅速排出，實現快速啟動。2、熱凝水進入疏水閥，閥內溫度迅速上升，溫度到達飽和溫度之前，雙金屬片感溫變形伸直。3、當凝結水停止進入疏水閥時，浮球隨液位下降關閉閥口，由于閥座總是在凝結水液位以下，形成水封，無蒸汽泄漏。4、當熱凝水再次進入疏水閥時，浮球隨凝結水液位自動調節閥口大小。

Working principle of inlet thread drain valve:
Working principle of inlet internal thread drain valve: 1. When the equipment is just started, air and condensate appear in the pipeline. At this time, the floating ball is far away from the valve under the support of bimetallic sheet, the valve port is opened, and the air and condensate are discharged quickly, so as to realize rapid start. 2. When the condensate enters the drain valve, the temperature in the valve rises rapidly. Before the temperature reaches the saturation temperature, the bimetallic sheet is deformed and straightened. 3. When the condensate stops entering the drain valve, the floating ball will close the valve port as the liquid level drops. Since the valve seat is always below the condensate liquid level, a water seal will be formed, and there is no steam leakage. 4. When the hot condensate enters the drain valve again, the floating ball will automatically adjust the size of the valve port with the condensate level.