進口立式浮球式蒸汽疏水閥德國洛克品牌精工細作

進口立式浮球式蒸汽疏水閥性能范圍：

規格范圍 DN15-DN100

溫度范圍 -20℃≈350℃

壓力范圍 PN16-PN40

閥體材質 鑄鋼/不銹鋼/鉻鉬鋼

閥桿材質 不銹鋼

閥蓋材質 鑄鋼/不銹鋼/鉻鉬鋼

連接方式 法蘭，內螺紋連接

應用場合 水、水蒸汽

進口立式浮球式蒸汽疏水閥工作原理：

立式自由浮球式蒸汽疏水閥的結構簡單，內部只有一個精細研磨的不銹鋼空心浮球，既是浮子又是啟閉件，無易損零件，使用壽命很長。裝置剛起動時，管道內出現空氣和低溫冷凝水，雙金屬自動排空氣元件把浮球推離閥座，閥門打開，排除不凝結氣體，低溫冷凝水流進疏水閥，浮球上升，凝結水迅速排放。裝置很快提升溫度，管道內溫度上升到飽和溫度之前，雙金屬自動排空氣元件感溫變型伸直；蒸汽疏水閥進入正常運行狀況，浮球隨液位升降調節閥孔流量；當凝結水停止進入時，浮球隨介質流向逼近閥座，關閉閥門。立式自由浮球式蒸汽疏水閥的閥座總處于液位以下，形成水封，無蒸汽泄漏。

進口立式浮球式蒸汽疏水閥產品特點：

1、立式浮球式疏水閥不受壓力、溫度、冷凝水流量波動的影響，連續排水，有水即排，性能穩定，最小過冷度為 0℃ ，能使加熱設備達到*工作效率

2、立式浮球式疏水閥能排連續飽和水，至使設備凝結水滯存量較少、升溫快、加熱溫度穩定。

3、立式浮球式疏水閥有自動排冷空氣裝置，無汽鎖現象，工作平衡無噪音。

進口立式浮球式蒸汽疏水閥產品概述：

德國《DE LOCKE》洛克進口立式浮球式蒸汽疏水閥，Vertical free ball float type steam trap，也叫立式疏水閥，立式疏水器，專用于立式的安裝形式，根據浮力的原理，使閥體內的浮球隨水位變化作升降運動，以達到閥門啟閉，即排水阻汽的作用的疏水閥。尤其對壓力低、排水量低和溫度穩定性要求高，不宜帶存凝結水的蒸汽設備更為適用。能排連續飽和水，至使設備凝結水滯存量較少、升溫快、加熱溫度穩定。能連續排水、性穩定、排水量大、漏水量小。

內部有一個精細研磨的不銹鋼空心浮球，既是浮子又是啟閉件，無易損零件，使用壽命很長。裝置剛起動時，管道內出現空氣和低溫冷凝水，雙金屬自動排空氣元件把浮球推離閥座，閥門打開，排除不凝結氣體，低溫冷凝水流進疏水閥，浮球上升，凝結水迅速排放。裝置很快提升溫度，管道內溫度上升到飽和溫度之前，雙金屬自動排空氣元件感溫變型伸直；蒸汽疏水閥進入正常運行狀況，浮球隨液位升降調節閥孔流量；當凝結水停止進入時，浮球隨介質流向逼近閥座，關閉閥門。立式自由浮球式蒸汽疏水閥的閥座總處于液位以下，形成水封，無蒸汽泄漏。

德國《DE LOCKE》洛克立式自由浮球式蒸汽疏水閥適用于蒸汽主管和伴熱管線，蒸汽管網及凝結水回收系統，特別對加熱速度要求快，溫度控制要求嚴，加熱設備不能積存凝結水的工藝更為合適，廣泛用于石油、化工、紡織、制藥等工礦企業。

Introduction of imported vertical floating ball steam trap products:
Vertical free ball float type steam trap, also known as vertical steam trap, is specially used for vertical installation. According to the principle of buoyancy, the floating ball in the valve body moves up and down with the change of water level, so as to open and close the valve, that is, the steam trap with the function of drainage and steam blocking. Especially for the steam equipment with low pressure, low displacement and high temperature stability, it is more suitable. It can discharge continuous saturated water, so as to make the condensation water of the equipment less stagnant, heating faster and heating temperature stable. Continuous drainage, stable performance, large displacement and small leakage.

There is a fine grinding stainless steel hollow floating ball inside, which is not only a float but also an opening and closing part. It has no vulnerable parts and has a long service life. When the device is just started, air and low-temperature condensed water appear in the pipeline. The bimetal automatic air exhaust element pushes the float ball away from the valve seat, and the valve opens to remove the non condensable gas. The low-temperature condensed water flows into the drain valve, and the float ball rises, and the condensed water is discharged quickly. The device raises the temperature quickly. Before the temperature in the pipeline rises to the saturation temperature, the bimetallic automatic air exhaust element is straightened; the steam trap enters the normal operation state, and the float ball rises and falls with the liquid level to adjust the valve orifice flow; when the condensate stops entering, the float ball approaches the valve seat with the medium flow, and the valve is closed. The valve seat of vertical free floating ball steam trap is always below the liquid level, forming a water seal without steam leakage.

German "de Locke" vertical free floating ball steam trap is suitable for steam main pipe and heat tracing pipeline, steam pipe network and condensate recovery system, especially for the process of fast heating speed, strict temperature control and heating equipment can not store condensate, which is widely used in petroleum, chemical, textile, pharmaceutical and other industrial and mining enterprises.