一輩子很長，要和溫暖有趣的人，在一起才美好。

    在中、小型水廠使用較多的是斜管沉淀池，相比較而言，斜管沉淀池處理效果比平流沉淀池好。在實際應用中配水方式和配水均勻性對沉淀效果的影響很大。Inclined tube sedimentation tanks are more commonly used in medium and small water plants. In comparison, the treatment effect of inclined tube sedimentation tanks is better than that of advection sedimentation tanks. In practical applications, the water distribution method and water distribution uniformity have a great influence on the precipitation effect.

    斜管沉淀池是一種把與水平面成一定角度的眾多斜管放置于沉淀區中的沉淀設施。其中增設斜管的作用就是為了減少池體的占地面積，并且也相應的增強了池子的處理效果，有效自幌高了表面負荷。運行時原水從下往上流動，顆粒則在中部積累到一定程度自動滑下或直接沉于斜管沉淀池底部。Inclined tube sedimentation tank is a sedimentation facility in which many inclined tubes at a certain angle with the horizontal plane are placed in the sedimentation area. The role of adding inclined pipes is to reduce the floor area of the pool body, and also to correspondingly enhance the treatment effect of the pool, effectively increasing the surface load from the front. During operation, the raw water flows from bottom to top, and the particles accumulate in the middle to a certain extent and automatically slide down or directly sink to the bottom of the inclined tube sedimentation tank.

    根據水流和顆粒的相對運動方向，可以分為側向流、上向流和同向流三種斜管沉淀池。同向流式沉淀池是指顆粒 和水流均向一個方向流動，在集水支渠的作用下將處理好的水和剩下的污泥分開。上向流沉淀池指的是水流和顆粒的運動方向相反，前者向上流動、后者向下流動。側向流沉淀池則是水流和顆粒流的方向垂直，前者沿著水平方向流動，后者向著下方流動，因?yàn)樗鳁l件不是很好，導致了板間支撐很難布置，現已很少使用，使用較多的是上向流斜管沉淀池。According to the relative movement direction of water flow and particles, it can be divided into three types of inclined tube sedimentation tanks: lateral flow, upward flow and same flow. Co-flow sedimentation tank means that particles and water flow in one direction, and the treated water is separated from the remaining sludge under the action of the catchment branch channel. Upward flow sedimentation tank refers to the opposite direction of water flow and particle movement, the former flows upwards and the latter flows downwards. Lateral flow sedimentation tanks are vertical to the direction of water flow and particle flow. The former flows horizontally, while the latter flows downwards. Because the water flow conditions are not very good, it is difficult to arrange the support between the plates. It is rarely used now. The upflow inclined tube sedimentation tank is more frequently used.

   蜂窩斜板填料主要由聚丙烯材料制成。從淺層理論的基礎講，在斜板上部設置沉淀距離合理的沉淀段，在下部控制斜板的幾何形狀，使斜板下部形成的絮凝段，通過作用和淺池沉淀機理達到礬花與水分離的目的。各種間距斜板填料均是通過不同高度的塑料肋條來支撐斜板片，肋條與斜板熱熔焊接，每兩層斜板片之間需要多根肋條支撐，組裝工藝復雜，而且斜板內部水流流道成矩形，常適用于上向流沉淀池。The honeycomb inclined plate packing is mainly made of polypropylene material. From the basis of shallow layer theory, a sedimentation section with reasonable sedimentation distance is set on the upper part of the inclined plate, and the geometric shape of the inclined plate is controlled at the lower part, so that the flocculation section formed at the lower part of the inclined plate can reach the alum blossom and water The purpose of separation. Various pitch sloping plate fillers are supported by plastic ribs of different heights. The ribs and the sloping plate are thermally welded. Each two layers of sloping plate need to be supported by multiple ribs. The assembly process is complicated and the inside of the sloping plate The water flow channel is rectangular, which is often suitable for upflow sedimentation tanks.

    斜管沉淀池運行調試：檢查進水是否均勻，不得對沉淀池造成沖擊，影響沉淀效果，堰槽高低及水平度至，保持均勻，經過以上施工工序，至此斜管沉淀池填料安裝已經全部完成。正常投入使用后需要根據進水中懸浮物濃度情況確定排泥周期，注意及時排泥，確保斜管沉淀池始終保持良好的運行狀態及令人滿意的水質。Operation and debugging of inclined tube sedimentation tank: check whether the water inflow is uniform, and shall not cause impact on the sedimentation tank and affect the sedimentation effect. The height and level of the weir and trough shall be kept uniform. After the above construction process, the installation of the filler of the inclined tube sedimentation tank has been completed. . After normal operation, the sludge discharge cycle needs to be determined according to the concentration of suspended solids in the inlet water, and attention should be paid to timely sludge discharge to ensure that the inclined tube sedimentation tank always maintains good operating conditions and satisfactory water quality.

    斜管支架采用主支架、副支架、網片的組合結構，主支架采用倒三角形截酣，抗彎截面模量大，承載能力高，該截面形狀大大地減少了支架本身的自重；主支架兩根上部鋼管之間沿度方向間隔地采橫鋼管連接，將現有技術中主支架底邊的實體結構變?yōu)橹锌战Y(jié)構，從而增加了水流的下.升通道和污泥的下降通道。副支架采用箏片桁架結構，強度高，重量輕，在由主副支架構成的網架上鋪設網片，使得斜管支架上表面處在同一水平而內且網格均勻，從而使斜管能夠均勻的與網片接觸，斜管不會因局部的不平整或受力不均而倒塌或損壞。The inclined tube bracket adopts the combined structure of the main bracket, the auxiliary bracket, and the mesh. The main bracket adopts an inverted triangle section, which has a large bending section modulus and high bearing capacity. This section shape greatly reduces the self-weight of the bracket; the two main brackets The upper steel pipes are connected by horizontal steel pipes at intervals along the degree direction, and the solid structure of the bottom side of the main support in the prior art is changed to a hollow structure, thereby increasing the ascending channel of water flow and the descending channel of sludge. The auxiliary bracket adopts the truss structure of zheng piece, which is high in strength and light in weight. The mesh is laid on the grid composed of the main and auxiliary brackets, so that the upper surface of the inclined tube bracket is at the same level and the grid is uniform, so that the inclined tube can be Even contact with the mesh, the inclined tube will not collapse or damage due to local unevenness or uneven force.

    忍耐不是懦弱，而是寬容；退讓不是無能，而是大度。人生，沒有走不過的經歷，只有走不出的自己；感情，沒有過不去的曾經，只有過不去的心情。有些人你忘不了，只能是獨自苦惱；有些情你放不下，只能是庸人自擾。

    《詩經·大雅》“文王有聲”篇有“灃水東注，維禹之績”。東漢經學家鄭玄對這句箋云:“昔堯時洪水，而灃水亦泛濫為害，禹治之使入洞，東注于河，禹之功也。河南禹水灃環保科技有限公司的“禹水灃”三字正是取之于此，斯人已逝，風骨猶存。作為一家以聚丙烯酰胺、聚合氯化鋁、活性炭系列為核心業務的創新型環?？萍计髽I(yè)，我們的產品可廣泛應用于自來水、高純水、洗煤水、印染水、城市污水、選礦廢水、制革廢水、鋼廠污水、電鍍廢水等各領域水處理行業，是廣大企業的理想合作伙伴，下屬企業：鞏義市夾津口多來凈水材料廠！ 

    鞏義市夾津口多來凈水材料廠是一家以無煙煤濾料、離子交換樹脂、聚丙烯酰胺、聚合氯化鋁、氯化羥鋁、活性炭、纖維球、化學除油器填料等凈水材料為主打產品的企業，擁有相對完整和科學的質量管理體系。我們注重自身的誠信、實力和產品質量。歡迎各界朋友蒞臨參觀、指導和業務洽談。