進口立式止回閥使用壽命-德國洛克 

進口立式止回閥結構特點：

1、閥瓣行程短，靈敏性高，大大減少了閥瓣關閉所需時間，有效降低了止回閥的水錘壓力。

2、密封面采用合金鋼或硬質合金，密封副材料配對合理，使用壽命長。

進口立式止回閥工作原理：

止回閥開啟是指依靠介質正向流動打開閥瓣，同樣的道理介質倒流推動閥瓣而關閉，止回閥還稱之為逆止閥、單向閥、逆流閥、和背壓閥等。多屬于自動閥門，主要功能是用來防止介質倒流，防止泵及驅動電動機反轉和容器介質的泄放使用。同時還用于壓力可能升至超過系統壓的輔助系統中作為安全保護。

進口立式止回閥描述：

德國《DE LOCKE》洛克進口立式止回閥，采用立式結構，加彈簧止回，通常用于豎立安裝的止回閥。正常處于關閉狀態，由于管線中進口端介質的壓力作用，而克服彈簧阻力使閥門開啟。當進口端介質壓力低于出口端時，彈簧將閥芯推向閥座而使閥門關閉，阻止介質逆流，故起止回作用。 本閥門由于采用彈簧支撐閥芯，故采用立式安裝或臥式裝均可。廣泛使用于化工、液化石油氣、流體等行業。

Description of imported vertical check valve:
German "de Locke" imported vertical check valve, vertical structure, plus spring check, usually used for vertical installation of check valve. The valve is normally closed. Due to the pressure of the medium at the inlet end of the pipeline, it overcomes the spring resistance and makes the valve open. When the medium pressure at the inlet end is lower than that at the outlet end, the spring pushes the valve core to the valve seat to close the valve and prevent the medium from countercurrent, so it plays a check role. The valve adopts spring to support the valve core, so it can be installed vertically or horizontally. Widely used in chemical, liquefied petroleum gas, fluid and other industries.
 

進口立式止回閥參數：

1、工作壓力：1.6-42Mpa，美標：150LB-2500LB，日標：10K-64K。

2、工作溫度:-196℃- 550℃。

3、閥門口徑; DN15-DN1200。

4、連接方式: 法蘭、對夾、絲口或焊接。

5、適用介質: 水、油品、氣體、蒸汽等。

6、應用領域：機械設備、化工設備、通用零部件、工業設備、給排水設備、造紙設備、制藥設備、通用設備、石化設備、電力設備、治金粉末設備采礦設備，市政、電子工業等領域。

Parameters of imported vertical check valve:
1. Working pressure: 1.6-42mpa, American Standard: 150lb-2500lb, Japanese standard: 10k-64k.
2. Working temperature: - 196 ℃ - 550 ℃.
3. Valve diameter: DN 15-dn 1200.
4. Connection mode: flange, clamp, thread or welding.
5. Applicable media: water, oil, gas, steam, etc.
6. Application fields: mechanical equipment, chemical equipment, general parts, industrial equipment, water supply and drainage equipment, paper making equipment, pharmaceutical equipment, general equipment, petrochemical equipment, power equipment, metallurgical powder equipment, mining equipment, municipal, electronic industry, etc.