進口黃銅減壓閥德國洛克品牌產品特點

進口黃銅減壓閥性能范圍： 

驅動方式：自力式

公稱通徑：DN15～DN50

公稱壓力：PN1.0-1.6Mpa

適用溫度：≤70℃

連接方式：法蘭、螺紋、焊接

結構形式：膜片式

閥體材質：黃銅

適用介質：冷熱水

制造標準：德國洛克原廠標準

應用場合：電站、冶金、建筑、鍋爐、設備、管道、熱能、空調、消防、給排水、水處理、石油化工、造紙印刷廠。

進口黃銅減壓閥產品概述：

德國《DE LOCKE》洛克進口黃銅減壓閥是通體內的啟閉件的開度來調節介質的流量，將介質的壓力降低，同時借助閥后壓力的作用調節啟閉件的開度，使閥后壓力保持在使用工況所需的壓力范圍。從流體力學的觀點看，減壓閥是一個局部阻力可以變化的節流元件，即通過改變節流面積，使流速及流體的動能改變，造成不同的壓力損失，從而達到減壓的目的。然后依靠控制與調節系統的調節，使閥后壓力的波動與彈簧力相平衡，使閥后壓力在一定的誤差范圍內保持恒定。

進口黃銅減壓閥產品特點：

采用直接作用隔膜式結構，內部結構非常簡單，無卡阻，性能可靠，經久耐用。

耐臟防水垢,不需過濾器,不需旁通管,配管極其簡單,能節省大量空間和配管成本。

出口壓力精密可調，在一般場合下，可以認為出口壓力不受進口壓力的影響（出口壓力的變化量是△P1的8%）。

*的水力特性，壓力損失小，減壓比可達成10：1以上。

可滿足多種減壓要求，特別適用于支管減壓系統。

Features of imported brass pressure reducing valve:
Using direct acting diaphragm structure, the internal structure is very simple, no jam, reliable performance, durable.
It is dirt resistant and water-proof. It doesn't need filter and bypass pipe. The piping is extremely simple and can save a lot of space and piping cost.
The outlet pressure is precisely adjustable. In general, it can be considered that the outlet pressure is not affected by the inlet pressure (the variation of outlet pressure is 8% of △ P1).
Excellent hydraulic characteristics, small pressure loss, decompression ratio can reach more than 10:1.
It can meet various decompression requirements, especially suitable for branch decompression system.
 

進口黃銅減壓閥產品原理：

出口壓力作用在隔膜底面和閥瓣底面，當它超過彈簧設定值時，壓縮彈簧，使閥瓣關閉。只要下游無水流動，出口壓力將基本保持在設定值（其變化量僅為入口壓力變化量的8%）；當下游用水時，出口壓力下降，彈簧推開隔膜，打開減壓閥。水流連續流通一陣后，減壓閥的開啟產生自阻尼效應，使啟閉動作趨于平穩。

Principle of imported brass pressure reducing valve:
The outlet pressure acts on the bottom of the diaphragm and the bottom of the disc. When it exceeds the spring setting value, it compresses the spring to close the disc. As long as there is no water flow in the downstream, the outlet pressure will be basically kept at the set value (its variation is only 8% of the inlet pressure variation); when water is used in the downstream, the outlet pressure will drop, and the spring will open the diaphragm and open the pressure reducing valve. After a period of continuous flow, the opening of the pressure reducing valve produces self damping effect, which makes the opening and closing action tend to be stable.