進口高溫蝶閥德國洛克各種參數以及說明

 

進口高溫蝶閥結構特點：

1、結構簡單，動作靈敏，使用方便，可操作可用蝸輪蝸桿、電動、氣動，滿足程控和遙控的需要。

2、流通量大，易于維護，工作性能可靠，具有調節介質流量、流速功能

3、內襯高溫耐火材料，外端有滾動軸承及潤滑系統。可采用水冷結構設計，快速散熱；

4、采用優質鋼材焊接，具有耐高溫、耐磨損、鋼性強、熱損失小、保溫效率高

5、結構合理，操作靈活、指示方位明確、維護方便、使用壽命長等優點

6、可水平安裝或垂直安裝。

7、配用DKJ、等電動執行器及有關配件，可實現手動、電動無干擾切換，微機程控、電動控制或中央集中控制，是實現自動化控制操作、調節流量的理想設備。

                                                                                 

進口高溫蝶閥規格參數：

公稱通徑：DN25-DN2000

公稱壓力：150Mpa-600LB

設計溫度：-196℃-600℃

連接方式：對夾，法蘭

適用介質：水、氣、油、化工、鹽水、燃氣，天然氣等等介質

氣源接口：G1/4、G1/8、G3/8、G1/2

供氣壓力：0.4 Mpa -0.8Mpa

作用形式：單作用執行機構：氣關式(B)--失氣時閥位開(FO);氣開式(K)--失氣時閥位關(FC)

雙作用執行機構：氣關式(B)--失氣時閥位保持(FL);氣開式(K)-- 失氣時閥位保持(FL)

控制方式：開關型、閥位信號反饋型、智能調節型(輸入輸出4-20mA)

其它配置：定位器、電磁閥、空氣過濾減壓器、限位開關、手輪                                                                                    

Specifications and parameters of imported high temperature butterfly valve:
Nominal diameter: dn25-dn2000
Nominal pressure: 150mpa-600lb
Design temperature: - 196 ℃ - 600 ℃
Connection mode: pair clamp, flange
Applicable media: water, gas, oil, chemical industry, brine, gas, natural gas, etc
Gas source interface: G1 / 4, G1 / 8, G3 / 8, G1 / 2
Air supply pressure: 0.4 MPa - 0.8 MPa
Action form: single acting actuator: air closing (b) - valve position open when losing air (FO); air opening (k) - valve position close when losing air (FC)
Double acting actuator: air close type (b) - valve position hold when losing air (FL); air open type (k) - valve position hold when losing air (FL)
Control mode: switch type, valve position signal feedback type, intelligent regulation type (input and output 4-20mA)
Other configuration: positioner, solenoid valve, air filter pressure reducer, limit switch, hand wheel
 

進口高溫蝶閥工作原理：

高溫蝶閥主要由框架、閘板、絲桿、螺母等零件構成，用手轉動手輪使絲桿帶著絲桿螺母和閘板沿水平方向往復運動，達到閘門的啟閉目的。

Working principle of imported high temperature butterfly valve:
The high-temperature butterfly valve is mainly composed of frame, gate, screw rod, nut and other parts. Turn the hand wheel by hand to make the screw rod with screw rod nut and gate move back and forth along the horizontal direction to achieve the purpose of gate opening and closing.
                                                                               

進口高溫蝶閥產品簡介：

德國洛克《DE LOCKE》進口高溫蝶閥，High temperature butterfly valve，也叫超高溫蝶閥，高溫介質蝶閥，高溫流體蝶閥，高溫氣體蝶閥，高溫液體蝶閥，高溫煙氣蝶閥，是指采用耐高溫的不銹鋼或者2520材質，采用耐高溫特種合金鋼材料，可保證蝶閥在高溫工況下穩定運行工作，*工作溫度可達1650℃，使用高溫氣體，煙氣，高溫液體等介質的開啟和關閉；

Introduction of imported high temperature butterfly valve products:
Germany Locke "de lock" imported high temperature butterfly valve Valve, also known as ultra-high temperature butterfly valve, high temperature medium butterfly valve, high temperature fluid butterfly valve, high temperature gas butterfly valve, high temperature liquid butterfly valve, high temperature flue gas butterfly valve, refers to the use of high temperature resistant stainless steel or 2520 material, the use of high temperature resistant special alloy steel material, can ensure the stable operation of the butterfly valve under high temperature conditions, the maximum working temperature can reach 1650 ℃, the use of high temperature gas, flue gas, high temperature Opening and closing of warm liquid and other media;
                                                                               

進口高溫蝶閥訂貨須知：

A、若訂貨前還未選定型號，請向我們提供您的使用參數:

1.公稱通徑 2.產品型號 3.流體性質（包括公稱壓力、溫度、介質） 4.閥體、密封材料 5.連接方式

B、若已經由設計單位選定我公司的產品型號，請按型號直接向我司銷售部訂購

C、當使用的場合非常重要或管路比較復雜時，請您盡量提供設計圖紙和詳細參

數，由我們德國洛克閥門技術員為您審核把關。

D、感謝您訪問我公司的網站〖〗，如有任何疑問.

您可以致電給我們《》我們一定會盡心盡力為您提供優質的服務!