進口蒸汽電磁閥（螺紋）德國洛克品牌-產品參數

進口蒸汽電磁閥（螺紋）產品參數：

公稱通徑：DN1-200mm 

公稱壓力：PN1.0-6.4Mpa 

工作壓差：0.04-6.4Mpa 

工作介質：蒸汽、汽水混合物、高溫氣體、油 

介質溫度：≤400℃

額定電壓V：AC：380、220、36、24 DC：220、110、36、24

功率(AC220V)：DN：5-20 24VA DN：65-150 50VA

Product parameters of imported steam solenoid valve (thread):
Nominal diameter: dn1-200mm
Nominal pressure: pn1.0-6.4mpa
Working pressure difference: 0.04-6.4mpa
Working medium: steam, steam water mixture, high temperature gas, oil
Medium temperature: < 400 ℃
Rated voltage v:ac:380, 220, 36, 24 dc:220, 110, 36, 24
Power (AC220V): DN: 5-20 24va dn:65-150 50VA
 

進口蒸汽電磁閥（螺紋）工作原理：

1.蒸汽電磁閥為分步動作直接先導式電磁閥，可根據斷電時所處開、關狀態的不同，可分為常閉式電磁閥和常開式電磁閥。 

2.常閉蒸汽電磁閥，線圈通電后，銜鐵在電磁力作用下先帶動副閥閥塞提起，主閥閥杯上的流體經副閥流走，減少了作用在主閥閥杯上的壓力，當主閥閥杯上的壓力減少到一定值時，銜鐵帶動主閥閥杯，并利用壓差而使主閥閥杯開啟，介質流通。線圈斷電后，電磁力消失，銜鐵因自重下落復位。同時依靠介質壓力，主副閥得以緊密關閉。 

3.常開蒸汽電磁閥，線圈通電后由于吸力作用，動鐵芯下移，把副閥閥塞壓下，副閥關閉，主閥閥杯內壓力上升，當壓力升到一定值時，主閥閥杯的上下壓差一樣，由于電磁力作用，動鐵芯失去主閥閥杯下，壓緊主閥閥座，閥門關閉。線圈斷電時，電磁吸力為零，副閥閥塞和支鐵芯由于彈簧作用向上提起，副閥打開，利用壓差把主閥閥杯推起，主閥打開，介質流通。

Working principle of inlet steam solenoid valve (thread):
1. steam solenoid valve is a direct pilot solenoid valve with step action. It can be divided into normally closed solenoid valve and normally open solenoid valve according to the different opening and closing state when power is off.
2. normally close the steam solenoid valve. After the coil is energized, the armature first drives the auxiliary valve plug to lift under the electromagnetic force. The fluid on the main valve cup flows through the auxiliary valve, reducing the pressure acting on the main valve cup. When the pressure on the main valve cup is reduced to a certain value, the armature drives the main valve cup, and makes the main valve cup open and the medium flows through the differential pressure. After the coil is cut off, the electromagnetic force disappears, and the armature is reset due to its own weight. Meanwhile, depending on the medium pressure, the main and secondary valves can be closed tightly.
3. normally open steam solenoid valve. After the coil is energized, the core moves down due to suction. Press down the secondary valve plug, close the secondary valve, and the pressure in the main valve cup rises. When the pressure rises to a certain value, the pressure difference between the upper and lower of the main valve cup is the same. Due to the electromagnetic force, the moving core loses the lower part of the main valve cup, and compresses the main valve seat and the valve closes. When the coil is de energized, the electromagnetic suction is zero. The secondary valve plug and support core are lifted upward due to the spring action, and the auxiliary valve is opened. The main valve cup is pushed up by the differential pressure, the main valve is opened and the medium flows.
 

進口蒸汽電磁閥（螺紋）產品簡介：

進口蒸汽電磁閥，Steam solenoid valve (screw)，是指用于蒸汽介質的開關截止的電磁閥，具有耐高溫和耐腐蝕的特性。主要適用鍋爐蒸汽-飽和蒸汽，熱電廠出來的蒸汽-過熱蒸汽兩種。廣泛地應用紡織、印刷、化工、塑料、橡膠、制藥、食品、建材、機械、電器、表面處理和科研部門以及浴室、食堂、空調等自控系統

1、飽和蒸汽 溫度壓力相對穩定，溫度低于250℃，工作壓力低于6.4Mpa

2、過熱蒸汽 溫度壓力變化基數較大 溫度*可達400℃以上，工作壓力則低于4.0Mpa

可對蒸汽加熱器、散熱器、干燥器等蒸汽設備及各類溫度自控儀、蒸汽定型機、蒸染機、蒸汽回潮機等成套設備的鍋爐蒸汽管道進行二位式自動控制和遠程控制區。廣泛應用于染化、紡織、印染、食品、醫藥、卷煙、水泥制品、石油化工、冶金等部門的自控系統。

Introduction of imported steam solenoid valve (thread)
Steam solenoid valve (screen) is a kind of solenoid valve used to switch off steam medium, which has the characteristics of high temperature resistance and corrosion resistance. It is mainly applicable to boiler steam saturated steam and steam superheated steam from thermal power plant. It is widely used in textile, printing, chemical, plastic, rubber, pharmaceutical, food, building materials, machinery, electrical appliances, surface treatment and scientific research departments as well as bathroom, canteen, air conditioning and other automatic control systems
1. The saturated steam temperature and pressure are relatively stable, the temperature is lower than 250 ℃, and the working pressure is lower than 6.4Mpa
2. The temperature and pressure of superheated steam vary greatly, and the maximum temperature is above 400 ℃, while the working pressure is below 4.0Mpa
It can be used for two position automatic control and remote control of steam pipes of steam equipment such as steam heater, radiator, dryer and complete sets of equipment such as various temperature automatic control instruments, steam setting machine, steam dyeing machine and steam moisture regain machine. It is widely used in automatic control system of dyeing, textile, printing and dyeing, food, medicine, cigarette, cement products, petrochemical, metallurgy and other departments.
 

進口蒸汽電磁閥（螺紋）訂貨須知：

A、若訂貨前還未選定型號，請向我們提供您的使用參數:

1.公稱通徑 2.產品型號 3.流體性質（包括公稱壓力、溫度、介質） 4.閥體、密封材料 5.連接方式

B、若已經由設計單位選定我公司的產品型號，請按型號直接向我司銷售部訂購

C、當使用的場合非常重要或管路比較復雜時，請您盡量提供設計圖紙和詳細參數，由我們德國洛克閥門技術員為您審核把關。

D、感謝您訪問我公司的網站〖〗，如有任何疑問.

您可以致電給我們《》我們一定會盡心盡力為您提供優質的服務!