水泥混凝土箱式生態護坡鋼模具生產須知是從模具的放置、使用、運輸進行詳細的說明的，施工人員只要注意以下這些問題模具的使用壽命就會延長很多，首先模具的放置上，一般模具負責人員都會選擇把模具放置到干凈、干燥的大型庫房進行放置，為了節省模具的占地空間會選擇把模具全部疊放到一起，但是需要注意的是不要把模具疊放的過高，因為模具一旦疊放的過高一旦產生巨大的壓力之后很容易全部掉落。

制作過程：

下來給模具造成很多不必要的影響，還有需要模具負責人從模具的生產、使用、放置上都要進行詳細的記錄，使用表格式記錄上模具的每個階段的具體情況，在使用模具的時候做到對模具的每個階段的情況一目了然，水泥混凝土箱式生態護坡鋼模具在使用的時候避免讓電動扳手磕碰到模具，還要注意應該先刷油再注入混凝土。

使用注意須知：

避免模具在脫模的時候與混凝土產生粘連造成不好脫模的現象，一旦模具在脫模的時候與混凝土產生粘連造成不好脫模使用刷子刷洗模具會對模具產生很多傷害，模具在運輸?shù)倪^程中應該少量疊放，使用海綿做一層穩固，把箱式生態護坡模具安置好再運輸。The production instructions of steel mold for cement concrete box type ecological slope protection are detailed from the placement, use and transportation of the mold. As long as the construction personnel pay attention to the following problems, the service life of the mold will be extended a lot. First of all, in the placement of the mold, the general mold responsible personnel will choose to place the mold in a clean and dry large warehouse, In order to save the floor space of the mold, we will choose to stack all the molds together, but we need to pay attention not to stack the molds too high, because once the mold is stacked too high, it is easy to drop all the molds once there is huge pressure.

Production process:

It will cause a lot of unnecessary influence on the mold. In addition, the person in charge of the mold needs to make detailed records from the production, use and placement of the mold. The table format is used to record the specific situation of each stage of the mold. When using the mold, the situation of each stage of the mold is clear at a glance, When using the steel mold of cement concrete box type ecological slope protection, avoid the electric wrench bumping against the mold, and pay attention to brush oil first and then inject concrete.

Notes for use:

To avoid bad demoulding phenomenon caused by adhesion between mold and concrete when demoulding. Once adhesion between mold and concrete causes bad demoulding when demoulding, brushing mold with brush will cause a lot of damage to mold. Mold should be stacked in a small amount in the process of transportation. Sponge should be used to make a stable layer, and box type ecological slope protection mold should be placed before transportation.