污水井篦子模具的使用是要與其他的配套模具一起進行加工生產的?？梢詽M足工程的預制生產和現澆生產。兩側的部位也會留出預留孔。在這個時間段范圍之內，能夠長時間的重復生產步驟。滿足不同工程的需求。模具不會出現太大的磨損情況。在生產完成之后需要統一將模具進行清理維護，給污水井篦子模具的整體刷上防銹油進行保存。檢查井井模具的使用在，在進行加工的時候不能夠有歪斜，甚至變形情況的出現，如果模具有生銹的話在使用完成后要及時的進行除銹，并且刷上保護劑，去長期的進行儲存起來，要做好他的入庫登記?？紤]到現在的這種井蓋模具是不能夠輕易移動的，污水井篦子模具所以說在廠房?jī)?nèi)可以在四角的位置架設起，風扇帶動空氣的流動，這樣就可以了，將徹底凝固完成后我們就能夠?qū)⒛＞卟痖_(kāi)。The use of sewage well grate mold is to be processed and produced together with other supporting molds. It can meet the prefabrication production and cast-in-situ production of the project. Reserved holes will also be reserved on both sides. Within this time period, the production steps can be repeated for a long time. Meet the needs of different projects. The die will not wear too much. After the completion of production, the mould shall be cleaned and maintained uniformly, and the whole mould of sewage well grate shall be brushed with antirust oil for preservation. The inspection well mold shall not be skewed or even deformed during processing. If the mold is rusted, it shall be derusted in time after use, painted with protective agent, stored for a long time, and registered in the warehouse. Considering that the current well cover mold can not be moved easily, the sewage well grate mold can be erected at the four corners in the plant, and the fan drives the air flow. In this way, we can disassemble the mold after complete solidification.