進口平板閘閥德國洛克各種參數

 

進口平板閘閥結構優勢:

1.閥體有鑄造和焊接兩種結構。

2.閥座采用O形密封圈密封和施加預緊力的浮動閥座結構，使閥門進出口雙向密封；并且該結構的啟閉力矩僅為普通閥門的1/2，能達到輕松開、關閥門。

3.閥座采用密封面上鑲嵌PTFE，具有PTFE對金屬和金屬對金屬的雙重密封，PTFE密封面同時清除閘板臟物的作用。

4.金屬對金屬密封的閥門，閥體外部設有注油脂結構，油脂通過注脂器、閥座進入閥門密封面，使閥門達到零泄漏。

5.帶導流孔閥門的閘板，無論是全開或是全關始終與密封面吻合，密封面得到保護不受介質直接沖刷，從而延長使用壽命。

6. 進口平板閘閥的全開的，通道平滑為直線，流阻系數極小，無壓力損失，可通毛球清掃管線。

7. 進口平板閘閥采用帶自密封能力的填料結構，無需經常調節，開、關極為輕便，且密封性可靠，填料函處設有輔助密封油脂注入結構，密封性能*可靠，真正達到零泄漏；解決了通用閥門填料處zui容易外漏的弊病。

8.閥門關閉時能自動卸掉內腔高壓，保證使用安全。

9.全封閉結構，防護性能好，可適應全天候要求。

10.閥門設有指示桿或觀察窗以表示閥門的啟閉情況。

                                                                                 

進口平板閘閥規格參數：

產品采用標準

設計標準          JB/T5298、APl6D

結構長度          法蘭     GB/T 12221、JB/T 5298

                  焊接     GB/T 15188.1

連接法蘭          GB/T9113、JB/T 79 ANSl 16.*

對焊端            GB/T 12224

試驗和檢驗        GB/T3927、JB/T 9092

 

產品性能規范

適用范圍          PN10.0～42.0MPa       DN25～200mm

適用溫度          -29～121℃

適用介質          普通型      石油、天然氣、成油品、水等

                  抗硫型      含H2S、CO2的石油、天然氣等

連接形式          法蘭端、焊接端、卡箍端

驅動方式          手動、電動、氣動等

Specifications and parameters of imported flat gate valve:
Product standards
Design standard JB / t5298, apl6d
Structural length flange GB / T 12221, JB / T 5298
Welding GB / T 15188.1
Connecting flange GB / t9113, JB / T 79 ANSl 16.*
Butt welding end GB / T 12224
Test and inspection GB / t3927, JB / T 9092
Product performance specification
The scope of application is pn10.0 ～ 42.0mpa, DN25 ～ 200mm
Applicable temperature - 29 ～ 121 ℃
Suitable for ordinary oil, natural gas, oil products, water, etc
Sulfur resistant oil and natural gas containing H2S and CO2
Connection type: flange end, welding end and clamp end
The driving mode is manual, electric, pneumatic, etc
                                                                                    

進口平板閘閥工作原理:

1. 采用浮動閥座，雙向啟閉，密封可靠，啟閉靈活。

2. 閘板均有導向條給予精密導向，同時密封面均噴焊硬質合金，耐沖蝕。

3. 閥體承載能力高，通道為直通式，全開時，與閘板導流孔相貫通和直管相似，流阻很小。閥桿采用復合填料，多重密封，使得密封可靠，摩擦力小。

4. 關閉閥門時，順時針轉動手輪，閘板下移至底部，由于介質壓強的作用，將進口端密封座推向閘板方向，形成較大的密封比壓，從而形成*道密封。同時，將閘板壓向出口端密封座上，成為雙重密封。

5. 由于采用雙重密封，所以可在不影響管道工作的情況下更換易損件。這是本廠產品優先于國內外同類產品的重要特征。

6. 開啟閘板時，逆時針旋轉手輪，閘板上移，導流孔與通道孔相貫通。隨著閘板的上升，貫通孔逐漸加大，至極限位置時，導流孔與通道孔相重合，此時全開。

Working principle of imported flat gate valve:
1. Floating valve seat, two-way opening and closing, reliable sealing, flexible opening and closing.
2. The ram is provided with guide strip for precise guidance, and the sealing surface is sprayed with cemented carbide for erosion resistance.
3. The bearing capacity of the valve body is high, and the channel is straight through. When it is fully opened, it runs through the gate diversion hole and is similar to the straight pipe, and the flow resistance is very small. The valve stem adopts compound packing and multiple sealing, which makes the sealing reliable and the friction force small.
4. When closing the valve, turn the hand wheel clockwise to move the ram down to the bottom. Due to the effect of medium pressure, the seal seat at the inlet end is pushed to the direction of the ram to form a larger sealing pressure, thus forming the first seal. At the same time, the ram is pressed to the sealing seat at the outlet end to form a double seal.
5. Due to the double sealing, the wearing parts can be replaced without affecting the pipeline work. This is an important feature that our products have priority over similar products at home and abroad.
6. When opening the gate, rotate the hand wheel anticlockwise to move the gate up and connect the diversion hole with the passage hole. With the rise of the ram, the through hole increases gradually. When it reaches the limit position, the diversion hole coincides with the passage hole, and then it is fully open.
                                                                               

進口平板閘閥產品簡介：

德國洛克《DE LOCKE》平板閘閥的兩邊密封是在閥門的中軸上平衡分布的機械密封，所以平板閘閥適用于天然氣、石油、和化工品的管線運輸。

從設計結構來說，平板閘閥分為帶導流孔和不帶導流孔的。帶導流孔的平板閘閥，其流量特性等同于同規格的管道，呈等百分比特性，不帶導流孔的平板閘閥，其中腔跨度較楔式閘閥小，且屬于規則的圓柱體，所以基本上除壓力損失較帶導流孔的大外，其余特性基本接近。

Introduction of imported flat gate valve products:
Both sides of the flat gate valve of German Locke de Locke is a mechanical seal evenly distributed on the central axis of the valve, so the flat gate valve is suitable for pipeline transportation of natural gas, oil and chemicals.
From the design structure, the flat gate valve is divided into with and without guide hole. The flow characteristics of flat gate valve with diversion hole are equal to those of the same specification pipeline, showing equal percentage characteristics. The cavity span of flat gate valve without diversion hole is smaller than that of wedge gate valve, and it belongs to regular cylinder, so the other characteristics are basically similar except that the pressure loss is larger than that of flat gate valve with diversion hole.
                                                     &n