進口保溫閘閥德國洛克進口品牌

 

進口保溫閘閥結構特點：

①夾套采用碳素鋼管焊接比鑄造的更加耐壓牢固。

②采用整體式夾套結構設計，更能均勻地保溫、保冷。

③保溫入口有法蘭、螺紋兩種形式供用戶選擇，也可定制入口連接方式及規格大小

                                                                                 

進口保溫閘閥規格參數：

公稱通徑：DN15-DN300

公稱壓力：1.6Mpa-6.4Mpa

適用溫度：200℃

適用介質：酸堿類

閥體材質：鑄鋼、碳鋼、不銹鋼

連接方式：法蘭連接

設計制造：GB12234-89

結構長度：GB12221-89

法蘭尺寸：JB/T79-94

檢驗試驗：GB13927

Specification parameters of imported thermal insulation gate valve:
Nominal diameter: dn15-dn300
Nominal pressure: 1.6mpa-6.4mpa
Applicable temperature: 200 ℃
Suitable medium: acid and alkali
Material of valve body: cast steel, carbon steel, stainless steel
Connection mode: flange connection
Design and manufacture: gb12234-89
Structure length: gb12221-89
Flange size: jb/t79-94
Inspection test: gb13927
                                                                                    

進口保溫閘閥工作原理：

進口保溫閘閥的流動阻力小。閥體內部介質通道是直通的，介質成直線流動，流動阻力小。啟閉時較省力。是與截止閥相比而言，因?yàn)闊o論是開或閉，閘板運動方向均與介質流動方 向相垂直。高度大，啟閉時間長。閘板的啟閉行程較大，降是通過螺桿進行的。水錘現象不易產生。原因是關閉時間長。介質可向兩側任意方向流動，易于安裝。閘閥通道兩側是對稱的。結構長度(系殼體兩連接端面之間的距離)較小。密封面易磨損，影響使用壽命。啟閉時，閘板與閥座兩個密封面相互摩擦滑動，要介質壓力作用下易產生擦傷磨損，影響密封性能，縮短使用壽命。價格較貴。接觸密封面較多，加工較復雜，特別是閘板座上的密封面不易加工，而且零件較多。形體簡單 , 結構長度短，制造工藝性好，適用范圍廣。結構緊湊，閥門剛性好，通道流暢，流阻數小，密封面采用不銹鋼和硬質合金，使用壽命長，采用PTFE填料．密封可靠．操作輕便靈活。

Working principle of imported thermal insulation gate valve:
The flow resistance of the inlet thermal insulation gate valve is small. The medium passage inside the valve body is straight, the medium flows in a straight line, and the flow resistance is small. It is more labor-saving when opening and closing. Compared with the stop valve, the gate movement direction is vertical to the direction of medium flow, whether it is open or closed. High height, long opening and closing time. The opening and closing stroke of ram is large, and the lowering is carried out by screw. Water hammer is not easy to produce. The reason is that the shutdown time is long. The medium can flow in any direction on both sides, and it is easy to install. The gate valve channel is symmetrical on both sides. The length of the structure (the distance between the two connecting ends of the shell) is small. The sealing surface is easy to wear and affect the service life. When opening and closing, the two sealing surfaces of ram and valve seat are friction and sliding, which will easily cause abrasion under medium pressure, which will affect sealing performance and shorten service life. The price is higher. The contact sealing surface is more, and the processing is more complex, especially the sealing surface on the ram seat is not easy to process, and there are many parts. The structure is simple, the structure length is short, the manufacturing technology is good, and the application range is wide. The valve has compact structure, good rigidity, smooth passage, small flow resistance, stainless steel and cemented carbide on the sealing surface, long service life, PTFE packing. Reliable sealing and flexible operation.
                                                                               

進口保溫閘閥產品簡介：

德國洛克《DE LOCKE》進口保溫閘閥在兩法蘭之間焊裝上夾套，閥門的側面、底部設置有夾套的連接口，夾套中通過循環蒸汽、導熱油或其它保溫保冷的介質，確保介質順暢地流過閥門或達到所需要的溫度，本產品主要用于石油、化工、冶金、制 等各類易結晶、粘稠度較高介質的系統中.

Introduction to imported thermal insulation gate valve products:
The imported thermal insulation gate valve of de lock of Locke is welded and installed with a jacket between two flanges. The side and bottom of the valve are equipped with a connecting port with a jacket. The jacket ensures the medium flows smoothly through the valve or reaches the required temperature through circulating steam, heat transfer oil or other medium for heat preservation and cooling. This product is mainly used for petroleum, chemical industry, metallurgy and manufacturing In the system of various easy crystallization and high viscosity medium
                                                                               

進口保溫閘閥訂貨須知：

A、若訂貨前還未選定型號，請向我們提供您的使用參數:

1.公稱通徑 2.產品型號 3.流體性質（包括公稱壓力、溫度、介質） 4.閥體、密封材料 5.連接方式

B、若已經由設計單位選定我公司的產品型號，請按型號直接向我司銷售部訂購

C、當使用的場合非常重要或管路比較復雜時，請您盡量提供設計圖紙和詳細參

數，由我們德國洛克閥門技術員為您審核把關。

D、感謝您訪問我公司的網站〖〗，如有任何疑問.

您可以致電給我們《》我們一定會盡心盡力為您提供優質的服務!