進口高壓閘閥德國洛克歐美品牌

 

進口高壓閘閥結構特點：

1、殼體采用鍛造及鑄造兩種工藝選項，外觀光潔，組織均勻，滿足高溫高壓要求；視用戶需求可提供全系列全鍛鋼閘閥；

2、特殊材料配對，確保密封面高硬度及硬度差；精密研磨，光潔如鏡，耐磨耐蝕，有效延長使用壽命；

3、背密封設計，有效保護密封填料，杜絕跑冒滴漏；

4、高壓水強度，高壓氣體強度，無損檢測等多道檢測，全面控制承壓件質量；

5、閥桿表面經精密磨削及硬化處理，抗擦傷耐腐蝕，有效地減輕啟閉力矩，操作更輕松；

6、采用特殊緩蝕填料結構設計，耐溫耐壓，無腐蝕，自動潤滑，減輕啟閉摩擦，避免對閥桿表面的腐蝕，進而免除外漏；

7、雙向承壓密封設計，滿足各類特殊工況的苛刻要求；

8、嚴格手工配研，確保雙側密封面吻合度 90% 以上，實現氣泡級出廠密封檢測；

9、系列獨特的閘板彈性槽設計，自動補償加工誤差，適應高溫工況，避免咬死； 系列為雙閘板設計，閘板自動矯正加工誤差，始終保持密封面100%吻合度，特別便于用戶現場維修保養；

10、閥蓋自緊密封設計，壓力越高，密封越可靠；

                                                                                 

進口高壓閘閥規格參數：

公稱壓力：16-420Bar

接口尺寸：1/2-2”DN15-50mm

適用溫度：-20℃～+425℃～+570℃;

制造材料：A105、304、316、316L、F91、F22

連接方式: 法蘭、焊接、內螺紋

適用介質：高溫高壓氣體、油品、水、過熱蒸汽等多種非腐蝕性或高腐蝕性介質;

Specifications and parameters of imported high pressure gate valve:
Nominal pressure: 16-420bar
Interface size: 1 / 2-2 "DN 15-50mm
Applicable temperature: - 20 ℃ ~ + 425 ℃ ~ + 570 ℃;
Manufacturing materials: A105, 304, 316, 316L, F91, F22
Connection mode: flange, welding, internal thread
Applicable media: high temperature and high pressure gas, oil, water, superheated steam and other non corrosive or highly corrosive media;
                                                                                    

進口高壓閘閥工作原理：

1、采用壓力自緊式密封結構，彈性閘板，兩端支管為焊接連。

2、閥座密封面采用鈷基硬質合金等離子噴焊而成，耐磨、抗擦傷性能好。

閥瓣密封面經硬化氮化處理。

3、閥桿表面經抗蝕性氮化處理，有良好的抗腐蝕和抗擦傷性。

4、閥門的開啟和關閉由電動裝置來控制，電動裝置分別配有專用電機，減速器、轉矩控制機構、現場操作機構、手、電動切換機構，除就地操作外還可進行遠距離操作。

Working principle of imported high pressure gate valve:
1. It adopts pressure self tightening sealing structure, elastic ram and welded branch pipes at both ends.
2. The sealing surface of the valve seat is made of cobalt base cemented carbide by plasma spray welding, with good wear resistance and abrasion resistance.
The sealing surface of the disc is hardened and nitrided.
3. The surface of the valve stem is treated by corrosion resistance nitriding, which has good corrosion resistance and scratch resistance.
4. The opening and closing of the valve is controlled by the electric device. The electric device is equipped with special motor, reducer, torque control mechanism, on-site operation mechanism, manual and electric switching mechanism. In addition to local operation, it can also carry out remote operation.
                                                                               

進口高壓閘閥產品簡介：

德國洛克《DE LOCKE》進口高壓閘閥也稱電站專用閥門，主要適用于火力電站各種系統的管路上，切斷或接通管路介質。電站閥門與其他閥門產品相比的特點是高溫高壓，獨特的自密封設計，壓力越高，密封越可靠。由于性能技術特性、工況的特殊使產品也形成了其他產品所替代不了的特點。本類閥門在管道中一般應當水平安裝。   

Introduction of imported high pressure gate valve products:
German Locke "de Locke" imported high pressure gate valve, also known as power station special valve, is mainly used for cutting off or connecting pipeline medium in various systems of thermal power station. Compared with other valve products, power station valve features high temperature and high pressure, unique self sealing design. The higher the pressure, the more reliable the seal. Due to the special performance, technical characteristics and working conditions, the product has formed the characteristics that can not be replaced by other products. This kind of valve should be installed horizontally in the pipeline.
                                                                            

進口高壓閘閥訂貨須知：

A、若訂貨前還未選定型號，請向我們提供您的使用參數:

1.公稱通徑 2.產品型號 3.流體性質（包括公稱壓力、溫度、介質） 4.閥體、密封材料 5.連接方式

B、若已經由設計單位選定我公司的產品型號，請按型號直接向我司銷售部訂購

C、當使用的場合非常重要或管路比較復雜時，請您盡量提供設計圖紙和詳細參

數，由我們德國洛克閥門技術員為您審核把關。

D、感謝您訪問我公司的網站〖〗，如有任何疑問.

您可以致電給我們《》我們一定會盡心盡力為您提供優質的服務!