進口電動漿液閥產品優點-德國洛克

一、進口電動漿液閥產品性能：

1、公稱壓力：PN1.0～1.6Mpa

2、通徑范圍：DN50～DN1000

3、連接形式：法蘭、對夾

4、閥體材質：球墨鑄鐵/鑄鋼

5、閥桿材質：碳鋼

6、閥蓋材質：球墨鑄鐵/鑄鋼

7、閥板材質：不銹鋼/鑄鋼

8、適用溫度：-15~+200℃

9、適用于礦山、電廠、選煤、排渣、污水處理、食品、造紙、醫藥、石油、化工等油品、水、蒸汽管路上，接通或截斷管路中的水泥漿、金礦粉、礦砂、爐渣、煤泥、紙漿、木漿、尾礦、纖維、粉塵、化學品處理污水、沉淀池、瀝青、料倉出口、水果、谷物、屠宰廠廢水等介質。

二、進口電動漿液閥產品特點：

1、采用對夾式結構，體積小，重量輕。

2、完全敞開的通道，可以防止介質在閥內沉積。

3、新研制的U型封圈，可以保證閥門的良好密封性。

4、閘板的外密封，則是通過嵌在閥體內具有彈性的密封條來實現，并可借助于螺釘，壓板進行調整。

5、流阻小。

6、安裝維修方便。

2、 Features of imported electric slurry valve products:
1. It adopts the double clip structure, small volume and light weight.
2. The fully open channel can prevent the medium from depositing in the valve.
3. The newly developed U-ring can ensure the good sealing performance of the valve.
4. The outer seal of ram is realized by sealing strip embedded in the valve body with elasticity, and can be adjusted by screw and pressing plate.
5. The flow resistance is small.
6. Easy installation and maintenance.

三、進口電動漿液閥產品概述：

德國《DE LOCKE》洛克進口電動漿液閥采用全圓形的通道設計，刀板底端加工成刀刃，光潔度高，保證良好的密封性。在刀板上端安裝有硬聚四氟PTFE、刮泥器，可防止粉塵砂礫等擦傷性物質進入填料盒。聚膠脂或含Ni耐磨鑄鐵制成的耐磨折邊錐體安裝在電動漿液閥的進口端，可防止顆粒物料直接沖刷在密封上，從而可改善的工作條件。

3、 Introduction of imported electric slurry valve products:
The electric slurry valve imported from de lock in Germany is designed with a round channel. The bottom end of the blade is processed into a blade with high smoothness and good sealing. The upper end of the cutter plate is equipped with a hard polytetrafluoroethylene PTFE and mud scraper, which can prevent the dust, gravel and other abrading substances from entering the packing box. The wear-resistant folding cone made of polyglue grease or Ni bearing wear-resistant cast iron is installed at the inlet end of the electric slurry valve, which can prevent the particles directly from washing on the seal, thus improving the working conditions and prolonging the life.

四、進口電動漿液閥產品業績：

1、上海紡織(集團)有限公司

2、徐州盛泉洗煤廠

3、浙江華都紡織集團有限公司

4、恒安集團

5、金東紙業有限公司

6、山東晨鳴紙業集團股份有限公司

7、濰坊砂礦有限公司

8、華東有色尾礦公司

9、福建建陽祥康織造有限公司

10、介休市晉強洗煤設備制造有限公司

11、微山縣匯永煤炭洗選有限公司

12、山西臨汾如意洗煤有限公司

13、西湖洗煤廠

14、山東洗煤廠

4、 Performance of imported electric slurry valve products:
1. Shanghai Textile (Group) Co., Ltd
2. Xuzhou Shengquan coal preparation plant
3. Zhejiang Huadu Textile Group Co., Ltd
4. Hengan Group
5. Jindong Paper Co., Ltd
6. Shandong Chenming Paper Group Co., Ltd
7. Weifang placer Co., Ltd
8. East China Nonferrous tailings company
9. Fujian Jianyang Xiangkang Weaving Co., Ltd
10. Jiexiu Jinqiang coal washing equipment manufacturing Co., Ltd
11. Weishan Huiyong coal washing Co., Ltd
12. Shanxi Linfen Ruyi coal preparation Co., Ltd
13. Xihu coal preparation plant
14. Shandong coal preparation plant