(i)      General manufacturing tolerances of ± 32 kg/m3 or ± 2 lb/ft3 apply

(i)適用于一般制造業的公差是32公斤/立方米或者2英磅/ft3.

(ii)    Performed at maximum operational pressure for 168 hours at 23°C on ?25.4mm, 50.8mm long test specimens。

?25.4mm, 50.8mm長的樣品在23℃下最高運行壓力了168個小時。

The information given within this document is of a general nature only. The values given must be considered as typical and do not constitute a product specification. No liability for loss or damage can be accepted by GDGL. Unless others wise stated, all properties are quoted at ambient conditions. All information contained herein is the propriety information of GDGL and must not be copied or disclosed to any other party without the prior written permission of GDGL. The information contained herein must only be used for the Specified Purposes for which it was provided.

本文件提供的資料只屬一般性質。所提供的數值必須被認為是典型的，并且不構成產品規格。任何損失或者損害的賠償責任都不能被GDGL.接受。除非另有證明，所有的屬性都是在環境條件下引用的。本文件所包含的所有信息均為GDGL.相關信息。未經GDGL.的書面許可。不得將其復印或外泄給任何其他地方。本文件所包含的信息只可用于所提供資料的制定用途。