S403M-SE由科爾莫根制造，是其S400伺服驅動系列的一部分。S403M-SE是一個主模塊，額定DC鏈路電壓為160-310伏。它還具有3安rms的額定輸出電流和9安rms的峰值輸出電流。

產品說明

這S403M-PB是一個數字伺服放大器打算與制造商的一起使用無刷 同步的 伺服系統 發動機。它是由科爾莫根。這伺服系統 放大器只有在實施額外的過濾措施后，才能在商業、商業或住宅區使用。這個單位必須是安全接地至保護接地母線在開關柜內部。只有在設備與主電源斷開五分鐘后，才能觸摸設備的帶電部分。的設置伺服放大器不得使用安裝軟件進行修改。使用放大器的伺服電機的額定電壓必須至少與伺服放大器的DC總線鏈路相同。

這S403M-PB裝置不得直接用于額定電壓超過230伏的不對稱接地電源。該設備也不應直接存放在非接地供電網絡上。不得在不符合國家指令的電機中進行調試。該產品必須儲存在-25℃和+55℃之間。如果機組存放超過一年，那么在調試前必須對其電容器進行改造。清洗伺服放大器時，必須小心確保沒有液體進入其中。產品必須使用1級銅線。

這S403M-PB必須遠離灰塵、蒸汽、油、堿性溶液以及導電或腐蝕性環境。該產品只能在污染度為2的環境中使用。它為固態提供過載保護發動機滿負荷電流的130%。它無法感應電機的過熱。該裝置必須僅用于工業用電機和設備。它可以運到世界任何地方。

The S403M-SE is a Kollmorgen digital servo amplifier. It falls under the S400 category featuring a current rating of 3Arms, a master module function and a SERCOS expansion option. It has a rated supply voltage of 115V to 230V, 35W dissipation at rated current, and a maximum and minimum load inductance of 75mH and 12mH respectively. It weighs approximately 3kg and measures 100mm (W) x 230mm (H) x 240mm (D). The servo amplifier comes with internal brake resistors and an optional external brake resistor. Some of its supply power attributes include fusing that is provided by the user and directly off electrical supply input.

The S403M-SE comes in an IP 20 protection category. It should be mounted in a control cabinet to protect it from liquids and external objects. The ambient conditions are operating temperature of 0 to 45 degrees, relative humidity of 85% without condensation, and a maximum installation altitude of 1000 meters. Its noise emission is capped at 45dB making it an ideal amplifier in most factories. The S403M-SE assumes a vertical mounting orientation on a DIN rail. Ensure that a protective cover that is 7mm wide is mounted on the left side of the system.

If used in unfavorable environments, you can hook an additional electrical fan to allow the S403M-SE to achieve rated power. The electrical connection will happen automatically. Ensure that you leave ample space below the amplifier for uninterrupted airflow. Avoid touch any part of the servo amplifier after switching it off since it might hold lethal voltage. Leave it for 5 minutes for the capacitors to discharge. Use only provided cables when making electrical connections. For peace of mind, it has a one year warranty.