加拿大Solinst液體測量探頭式水位計（101 P2）
加拿大Solinst液體測量探頭式水位計（101 P2）
加拿大Solinst液體測量探頭式水位計（101 P2）
加拿大Solinst液體測量探頭式水位計（101 P2）
加拿大Solinst液體測量探頭式水位計（101 P2）

加拿大Solinst液體測量探頭式水位計（101-P2）

價格

訂貨量(臺)

￥1000.00

≥1

聯系人 馬經理 客戶經理

掃一掃添加商家

莸莾莾莾莾莵莹莹莵莽莼

發貨地 河北省保定市
進入商鋪
掃碼查看

掃碼查看

手機掃碼 快速查看

在線客服

商品參數
|
商品介紹
|
聯系方式
品牌 Solinst
是否進口 是
產地 加拿大
型號 101 P2
LM2 英尺和十分之一：每 1/100 英尺標記一次。
LM3 米和厘米：每毫米標記一次
尺寸 0.55 英寸直徑，7.5 英寸長（14 毫米 x 190 毫米）
重量 ~7 盎司（200 克）
卷軸長度 參考詳情
其他參數 參考詳情
商品介紹
產品名稱：液體測量探頭式水位計
品牌：Solinst
產地：加拿大
型號：101 P2
 
潛水探頭測量水位和總井深
使用位于探頭尖端的傳感器進行更一致的測量
Solinst PVDF 扁平膠帶提高了抗拉強度和電效率


 
101 型水位計是便攜式手動儀表的行業標準，用于測量井、鉆孔、立管和水箱中的水深。它們堅固、易于使用，讀數精確到 1/100 英尺或每毫米。

101 P2 型水位計具有易于維修的探頭和熱壓印聚乙烯扁平膠帶。




準確的：
每 1/100 英尺或毫米的標記
可溯源至國家標準
靈敏度可調到電導率
探頭可避免級聯水中的錯誤讀數
 
可靠的：
永久性激光打標
帶不銹鋼導體的非拉伸 PVDF 扁平膠帶

長壽：
堅固、防腐蝕的組件
堅固、靈活的膠帶
易于拼接和維修
 
靈活的：
PVDF 替換膠帶可與其他儀表互換



增強的激光標記膠帶功能：
耐用的 PVDF 非拉伸膠帶
改進的電氣性能
較厚的狗骨設計可防止粘在井邊
每 1/100 英尺或每毫米永久激光打標

PVDF 扁平膠帶每 1/100 英尺或每毫米激光打標一次；長度可達 5000 英尺 (1500 m)。新的扁平膠帶通過在每個導體中使用 6 股鍍銅不銹鋼和 13 股不銹鋼提高了抗拉強度和電氣效率。P7 水位計探頭經過精心設計，可浸入 1000 英尺（300 m）。探頭尖端的傳感器在井、鉆孔和級聯水中提供始終如一的準確測量，位移幾乎為零。


聚乙烯膠帶
101 P2 型水位計使用高品質聚乙烯膠帶，卷起順暢、保持柔韌性并筆直懸掛在井中。每毫米或 1/100 英尺的熱壓印標記允許準確的讀數。3/8" (10 mm) 寬的膠帶長度可達 1000 ft. (300 m)。

七股不銹鋼導體耐腐蝕，提供強度且無拉伸。它們使膠帶非常容易維修和拼接。狗骨設計減少了對潮濕表面的粘附。
M2英尺和十分之一：每 1/100 英尺標記一次。
M3米和厘米：每毫米標記一次
 
Solinst 聚乙烯膠帶設計
狗骨設計可防止膠帶粘在井壁上
永久性熱壓印標記易于閱讀
非拉伸膠帶在每個導體中使用 7 股不銹鋼
每 1/100 英尺或每毫米標記一次
易于修復的膠帶




Solinst 101 型 P7 和 P2 水位計可提供如下所示的卷軸，標準長度如下

小卷軸    * 100 英尺。    30米
              * 200 英尺。    60米
              * 300 英尺。    100米
中卷軸    * 500 英尺。    150米
              * 750 英尺        250米
              * 1000 英尺。  300米
大卷軸    1250 英尺        400米
              1650 英尺        500米
              2000 英尺        600米
*聚乙烯膠帶僅提供這些長度




P2水位計探頭
P2 水位計探頭采用屏蔽設計，以減少或消除級聯水中的錯誤讀數。探頭由帶有氯丁橡膠熱縮密封的不銹鋼主體組成。它不適合浸沒到任何顯著深度。其簡單的設計使其易于維修。
尺寸： 0.55 英寸直徑，7.5 英寸長（14 毫米 x 190 毫米）
重量： ~7 盎司（200 克）


中文內容來自機器翻譯，內容僅供參考，實際內容可參考原廠介紹或以合同為準。
英文原文：


101 P7 Submersible Probe measures water levels and total well depth
More consistent measurements with sensor located at the tip of probe
Solinst PVDF flat tape has increased tensile strength and electrical efficiency


The Solinst 101 Water Level Meter with P7 Probe features an extremely durable, laser marked PVDF flat tape, with an enhanced dog bone design that is thicker, reducing adherence to the side of well casing.

 

Enhanced Laser Marked Tape Features：

Durable PVDF non-stretch tape
Improved electrical properties
Thicker dog bone design prevents clinging to sides of the well
Permanently laser marked every 1/100 ft or each mm


The PVDF flat tape is laser marked every 1/100 ft or each mm; lengths up to 5000 ft (1500 m). New flat tape has increased tensile strength and electrical efficiency by using 6 strands of copper coated stainless steel and 13 strands of stainless steel in each conductor. The P7 Water Level Meter Probe is engineered to allow submersion to 1000 ft. (300 m). Sensor at the tip of the probe provides consistently accurate measurements in wells, boreholes, and cascading water, with almost zero displacement.


With a stand-alone design, convenient carrying handle, and sturdy probe holder, the standard reels are ergonomically designed for ease of use. They are robust and smooth running. The battery is housed in a convenient drawer in the front of the reel, allowing quick replacement. The reels are equipped with an on/off sensitivity switch, light, buzzer, battery test button, brake and a tape guide stored on the frame.

 

Length Options：

Solinst Model 101 P7 and P2 Water Level Meters are available on reels as shown below, in the following standard lengths:

Small Reel        * 100 ft.    30 m
                         * 200 ft.    60 m
                         * 300 ft.    100 m
Medium Reel    * 500 ft.    150 m
                         * 750 ft.    250 m
                         * 1000 ft.    300 m
Large Reel           1250 ft.    400 m
                            1650 ft.    500 m
                             2000 ft.    600 m
* Polyethylene tapes are only available in these lengths



Water Level Meters    Model 101
solinst  water level meters  measure depth of water in wells  water wells  boreholes  depth of water  depth of water in wells  depth of water in boreholes  depth of water in standpipes  water level indicators  water level indicator for piezometer image




For measuring the depth to water in wells, boreholes, standpipes, and tanks, Model 101 Water Level Meters are the industry standard for portable hand operated meters. They are sturdy, easy to use and read accurately to 1/100 ft. or each millimeter.

There are two versions to choose from. The Model 101 P7 Water Level Meter features a pressure-proof probe rated to 500 psi and laser marked PVDF flat tape.

The Model 101 P2 Water Level Meter features an easy-to-repair probe and heat embossed polyethylene flat tape.

Also available, are the less expensive Model 102 and 102M Coaxial Cable Water Level Meters for use in small diameter tubes, and the basic Model 101B Water Level Meter (see Model 102 and 101B Data Sheets).

 

Features
Accurate:

Markings each 1/100 ft. or millimeter
Traceable to national standards
Sensitivity adjustable to conductivity
Probes avoid false readings in cascading water
 

Reliable:

Permanent laser markings
Non-stretch PVDF flat tape with stainless steel conductors
 

Long Life:

Rugged, corrosion proof components
Strong, flexible tapes
Easy to splice and repair
 

Flexible:

PVDF replacement tapes are interchangeable with other meters



Laser Marked Flat Tape：

Durable, non-stretch PVDF flat tape
Accurately marked each mm or every 1/100 ft
Tape splice option maintained
Certified Traceable to National Standards
 

PVDF Laser Marked Water Level Tape：
The Model 101 P7 Water Level Meter uses extremely durable, PVDF flat tape, traceable to NIST and EU measurement standards. Each tape conductor contains 13 strands of stainless steel, and 6 strands of copper-coated steel, making the tape non-stretch and high in tensile strength and electrical efficiency. The tape has a thick dog bone design that prevents adherence to wet surfaces, and allows it to hang straight in application. The tape is also easy to splice.

The 3/8" (10 mm) tapes come with permanent laser markings every 1/100 ft. or each millimeter, in lengths up to 5000 ft. (1500 m).

LM2: Feet and tenths: with markings every 1/100 ft.
LM3: Meters and centimeters: with markings every mm

 


 

Operating Principles：
Model 101 Water Level Meters use corrosion proof stainless steel probes attached to permanently marked flat tape, fitted on a well-balanced reel. They are powered by a standard 9 volt battery.

The probes incorporate an insulating gap between electrodes. When contact is made with water, the circuit is completed, activating a loud buzzer and a light. The water level is then determined by taking a reading directly from the tape at the top of the well casing or borehole.

A sensitivity control allows the buzzer to be turned off while in cascading water, and ensures a clear signal in both high and low conductivity conditions.

 

Polyethylene Tape：
The Model 101 P2 Water Level Meter uses high quality polyethylene tape that reels smoothly, remains flexible and hangs straight in the well. Heat embossed marking each millimeter or 1/100 ft. allow accurate readings. The 3/8" (10 mm) wide tapes come in lengths up to 1000 ft. (300 m).

Seven stranded stainless steel conductors resist corrosion, provide strength and are non-stretch. They make the tape very easy to repair and splice. The dog-bone design reduces adherence to wet surfaces.

M2 Feet and tenths: with markings every 1/100 ft.
M3 Meters and centimeters: with markings every mm

價格僅供參考，最終采購價格需按簽訂合同為準。
聯系方式
公司名稱 河北恒儀電子科技有限公司
聯系賣家 馬經理 （QQ：2044339890）
電話 莵莾莸莹-莺莽莼莻莸莻莶
手機 莸莾莾莾莾莵莹莹莵莽莼
地址 河北省保定市
聯系二維碼