發票說明：本店標價，都是不包括稅點；開票另加稅點，詳細咨詢客服！

注：關于本產品標題，由于商品標題搜索功能的特性，為方便采購方的購物搜索，所起標題關鍵詞僅適用于搜索功能，不涉及廣告宣傳和功能描述。

溫馨提示：由于現貨市場浮動較大，店鋪所有規格均為參考價格，具體報價請咨詢客服，謝謝！

海藍色彩涂卷基板——熱鍍鋅板白銹和黑斑產生的原因有：黑斑是白銹進一步氧化形成的。白銹產生的原因主要有：1、鈍化不良，鈍化膜厚度不夠

或不均勻；2、表面未涂油或帶鋼表面殘留水分；3、卷取時帶鋼表面含有水分；4、鈍化未完全烘干；5、在運輸或儲存中受潮或雨水淋濕；

6、成品存放時間過長；7、鍍鋅板與其他酸堿等腐蝕性介質接觸或存放在一起。成品在庫中很長允許存放三個月，以避免存放過久產生氧化。

熱鍍鋅板長度，鍍鋅鋼板的長度不允許有負值公差，很大不允許超過+6mm。彩涂卷如果選用不當，結果不是材料標準高，造成浪費。

The causes of —— hot-dip galvanized plate white rust and black spots are as follows: black spots are formed by further oxidation of white rust.

The main causes of white rust are: 1, poor passivation, passivation film thickness is insufficient or uneven; 2, surface is not oil or strip surface residual water;

3, strip surface contains water; 4, passivation is not completely dried; 5, damp or rain in transportation or storage; 6, finished products storage time is too long;

7, galvanized plate contact or stored together with other corrosive media such as acid and alkali.Finished products are allowed to be stored for three months to

avoid excessive oxidation.The length of hot galvanized plate, the length of galvanized steel plate does not have negative tolerance, very not allowed to

exceed + 6mm.If the color coating roll is not selected properly, the result is not a high material standard, resulting in waste.