

廈門雄霸電子商務有限公司
主營產品: 集散式控制系統, 可編程控制系統, 伺服系統, 機器人系統
National-Instruments-SCXI-1336-16x16矩陣-端子板
價格
訂貨量(個)
¥4500.00
≥2
店鋪主推品 熱銷潛力款
쑥쑝쑝쑦쑠쑞쑡쑞쑝쑡쑣
在線客服

廈門雄霸電子商務有限公司
店齡4年
企業認證
聯系人
張先生 銷售經理
聯系電話
쑥쑝쑝쑦쑠쑞쑡쑞쑝쑡쑣
經營模式
經營批發
所在地區
福建省廈門市
主營產品
這SCXI-1336(零件號:777687-36)配置SCXI-112916x16(雙線)矩陣形式的高密度網絡。這接線盒將信號線直接連接到端子板內的螺絲端子。端子板利用矩陣擴展電纜進行即時行擴展,不需要外部布線。這鎳SCXI-1336此外,還包含掃描儀高級輸出和外部輸入觸發信號的關聯,并具有兩個128針DIN連接器,用于連接模塊之間的列。這SCXI-1336提供了利用至少兩行來擴展網絡行數的有利策略鎳 SCXI-1336。
該產品遵循適用的歐洲指令的基本要求,提供73/23/EEC的低壓指令(安全)和89/336/EEC的電磁兼容性方向性(EMC)。該儀器還允許矩陣延長線通過行連接的方式進行列擴展,并包含一個前置接線盒。
該端子板所需的工具是信號調理底盤SCXI-1129開關模塊,1/8英寸。平頭螺絲刀、1號和2號十字螺絲刀、尖嘴鉗、鋼絲鉗、電線絕緣剝離器和矩陣擴展插頭。使用該儀器時,重要的是要知道當任何繼電器端子上存在危險電壓(%3E42.4 Vpk/60 VDC)時,安全低壓(≤42.4 Vpk/60 VDC)不能連接到任何其他繼電器端子。
The SCXI-1336 (Part Number: 777687-36) configures the SCXI-1129 high-density network as a 16x16 (2-wire) matrix. This Terminal Block gives direct connectivity of signal wires to the screw terminals inside the terminal blocks. The terminal block works with the utilization of the matrix expansion cable for instant row extension and does not require outer wiring. The NI SCXI-1336 additionally contains associations for scanner advanced outputs and outside input trigger signals and has two 128-pin DIN connectors for interfacing columns between modules. The SCXI-1336 offers advantageous strategies for expanding the quantity of rows of a network utilizing at least two NI SCXI-1336.
This product follows the essential requirements of applicable European Directives, offering a Low-Voltage Directive (safety) of 73/23/EEC and an Electromagnetic Compatibility Directivity (EMC) of 89/336/EEC. This instrument also allows matrix extension wires for column expansion by means of a row connection and incorporates a front-mounting terminal block.
The tools required for this terminal block are an SCXI chassis, the SCXI-1129 switch module, a 1/8 in. flathead screwdriver, numbers 1 and 2 Phillips screwdrivers, long-nose pliers, a wire cutter, a wire insulation stripper, and a matrix expansion plug. When utilizing this instrument, it is important to know that when hazardous voltages (>42.4 Vpk/60 VDC)


