這鎳SCXI-1350(零件號:776575-50)需要一個SCXI機箱、SCXI模塊、一個數據采集板、電纜、一臺計算機和一個小平頭螺絲刀來使用適配器。這多機箱適配器允許用戶將多機箱系統連接到數據采集板。下列模塊可以與一起使用SCXI 1350:的SCXI-1163,SCXI-1100,SCXI-1162,SCXI-1120,SCXI-1161,SCXI-1140,SCXI-1160，以及SCXI-1121。此外，該SCXI-1181試驗板模塊和SCXI-1180饋通面板可以通過50針或100針帶狀電纜連接到任何數據采集板。

這多機箱適配器有一個背面插頭、一個模塊插頭和一個機箱擴展器插頭。用戶可以利用帶狀電纜將后連接器連接到數據采集板或之前的機箱。模塊連接器插入SCXI模塊的背面信號連接器，而另一條帶狀電纜將機箱連接器連接到多機箱適配器在下面的底盤中。

連接的一個例子是鎳SCXI-1350能夠包括將三機箱系統與MIO 16號數據采集板。對于這種類型的鏈接，三個NBI電纜和三個國家儀器公司SCXI 1350多機箱適配器是必要的。用戶應該記住，如果他們用DIO數據采集板為系統布線，那么DIO板將控制所有機箱。然而，幾條備用的DIO線路將會混亂。當用戶用MIO數據采集板為系統布線時多機箱適配器將MIO板的模擬通道0連接到初始機箱的模擬輸出。MIO板的模擬通道1鏈接到第二個機箱的模擬輸出，依此類推。

The NI SCXI-1350 (Part Number: 776575-50) requires an SCXI chassis, SCXI modules, a data acquisition board, cables, a computer, and a small flathead screwdriver to use the Adapter. This Multichassis Adapter allows the user to link a multichassis system to a data acquisition board. The following modules can be used with the SCXI 1350: the SCXI-1163, SCXI-1100, SCXI-1162, SCXI-1120, SCXI-1161, SCXI-1140, SCXI-1160, and SCXI-1121. In addition, the SCXI-1181 Breadboard Module and the SCXI-1180 Feedthrough Panel can be linked to any data acquisition board via a 50-pin or 100-pin ribbon cable.

This Multichassis Adapter has a male back connector, a female module connector, and a male chassis extender connector. The user can utilize a ribbon cable to link the back connector to the data acquisition board or a previous chassis. The module connector inserts into the back signal connector of an SCXI module, while another ribbon cable links the chassis connector to the Multichassis Adapter in the following chassis.

One example of the connections the NI SCXI-1350 is capable of includes linking a three-chassis system with an AT-MIO-16 data acquisition board. For this type of linking, three NBI cables and three National Instruments SCXI 1350 Multichassis Adapters are necessary. The user should keep in mind that if they are cabling a system with a DIO data acquisition board, then the DIO board will control all the chassis. However, several of the spare DIO lines will be jumbled.  When the user is cabling a system with an MIO data acquisition board, the Multichassis Adapters link analog channel 0 of the MIO board to the analog output of the initial chassis. Analog channel 1 of the MIO board is linked to the analog output of the second chassis, and so on.