采用高速、高精度放大器PXI國家儀器公司-4022(零件號:779614-01)是一個6線，保護和電流PXI放大器模塊適用于數字萬用表。高精度、高速放大器有助于微調采集信號。對于復雜PCB上并聯的電阻或電纜測試應用，的保護功能PXI-4022允許用戶進行基于6線的電阻測量。

該模塊具有低電動勢、低泄漏、鍍金、實心銅輸入端子。這PXI國家儀器公司-4022是測量類別II額定設備，設計用于承載小于或等于250V的信號電壓。然而，該模塊可以安全地承受高達2500V的浪涌電壓。就其輸入和輸出特性而言PXI-4022在%3E10運行¹⁰ω輸入阻抗，%3C 5 pA輸入偏置電流，12 V最大輸出電壓范圍和15 mA最大輸出驅動電流。這PXI放大器模塊集成過壓保護，用于保護輸出、保護輸入“+”和保護輸入“-”端子。

該模塊的前面板有五個連接器，背面有兩個電氣等效的連接器。五個前面板信號連接器包括:保護/放大器輸出、保護/放大器正輸入、保護感測/放大器負輸入和兩個浮動公共(LO)。兩個背面安裝的連接器代表模塊的浮動接地。用戶可以安裝倪PXI-4022PXI機箱中的空插槽(兼容)中的模塊。該模塊可在MAX(即測量和自動化瀏覽器)的幫助下輕松配置。

Featured with a high-speed, high-precision amplifier, the National Instruments PXI-4022 (Part Number: 779614-01) is a 6-Wire, Guard and Current PXI Amplifier Module meant for use with Digital Multimeters. The high-precision, high-speed amplifier helps fine tune signals for acquisition. For resistors connected in parallel on complex PCBs or for cable test applications, the guarding functionality of the PXI-4022 allows the user to make 6-wire based resistance measurements.

This module has low-EMF, low-leakage, gold plated, solid copper input terminals. The National Instruments PXI-4022 is a Measurement Category II rated device, which is designed to carry signal voltages less than or equal to 250V. However, this module can safely withstand up to 2,500 V surge voltage. As far as its input and output characteristics are concerned, the PXI-4022 operates at >10¹⁰ Ω input impedance, < 5 pA input bias current, ±12 V max output voltage range, and ±15 mA max output drive current. This PXI Amplifier Module has integrated overvoltage protection for Guard out, Guard In "+", and Guard In "-" terminals.

The front panel of this module has five connectors, with two electrically equivalent connectors are provided on the back side. The five front panel signal connectors include: a Guard/amplifier output, Guard/amplifier positive input, Guard-Sense/amplifier negative input, and two Floating common (LO). The two back mounted connectors represent the module`s floating ground.  The user can install the NI PXI-4022 module in an empty slot (compatible) in a PXI chassis. This module can easily be configured with the help of MAX, I.e. Measurement & Automation Explorer.