GE Fanuc IC697CPX772是一款單插槽CPU，具有對機器和進程的實時控制功能。該模塊帶有512 KB的內置RAM，用于存儲用戶數據，包括程序、配置和寄存器數據。IC697CPX772具有256 KB的非易失性閃存和用于存儲用戶數據和固件的操作內存。IC697CPX772模塊的工作條件包括一個尺寸的外殼，沒有任何氣流進入系統。該模塊的工作溫度為50攝氏度。如果使用100瓦DC/AC電源或90瓦DC電源，則模塊會降額。
IC697CPX772正面有七個綠色LED，指示CPU的狀態：撥動開關的位置、內存保護、串行端動和程序狀態。三位開關（運行/停止）用于控制其操作。用戶數據使用軟件進行保護。鑰匙開關用于手動保護它。最終用戶必須小心安裝PLC設備，以確保安全和正確操作。模塊應通電，左上角（OK）LED將閃爍。診斷成功完成后，左上方的LED將保持點亮，第二個（運行）和第三個（EN）LED將熄滅。如果鑰匙開關處于off（斷開）位置，則第四個（左下）LED（MEM PROTECT（記憶保護））熄滅。CPU現在可以進行編程了。該模塊的配置不需要任何跳線或DIP開關。
技術規格
模塊類型：處理器
插槽數量：1（單插槽）
所需電流：3.1安培
點數：2K輸入和輸出（任意組合）
串行端口：三個（RS-232和RS-485）
支持：IC660/IC661 I/O和IC697 I/O

The GE Fanuc IC697CPX772 is a single-slot CPU with real-time control functions over machines and processes. This module comes with 512 KB of built-in RAM for the storage of user data, including program, configuration, and register data. IC697CPX772 has a non-volatile flash memory of 256 KB and operational memory used to store user data and firmware. The operating conditions for the IC697CPX772 module include an enclosure of minimum size without any air flow into the system. The operating temperature of this module is 50 degrees Celsius. The module is subject to derating if the 100Watt DC/AC supply or 90-Watt DC supply is in use.
IC697CPX772 includes seven green LEDs on its front which indicate the status of the CPU: the position of the toggle switch, memory protection, serial port activity, and the state of the program. A three-position switch (RUN/STOP) is used to control its operations. User data is protected using software passwords. A key switch is used to protect it manually. The end user must carefully install the PLC equipment for safe and proper operation. The module should power up and the top left (OK) LED will blink. When diagnostics he successfully finished, the top left LED will remain ON, and the second (RUN) and third (EN) LEDs will be OFF. The fourth (bottom left) LED (MEM PROTECT) is off if the keyswitch is in the OFF position. The CPU is now ready to be programmed. This module does not require any jumpers or DIP switches for its configuration.
Technical Specifications
Module Type:  Central Processing Unit
Number of Slots:  1 (Single slot)
Current Required:  3.1 Amps
Number of Points:    2K inputs and outputs (any mix)
Serial Ports:  Three (RS-232 and RS-485)
Supports:  IC660/IC661 I/O and IC697 I/O
369-LO-0-M-F-E-0-0
469-P5-HI-A20
469-P5-LO-A20-E
SR469-CASE
SR469-P1-HI-A200E
SR469-P1-LO-A20-E
SR469-P5-HI-A20
SR469-P5-HI-A20-H
SR469-P5-HI-A20-T
SR469-P5-HI-A20-T-H
489-P5-LO-A20
MRP680489
VMIVME-7489
SR489-P5-HI-A20
750P5G5S5HIA20REH
SR750-P5-G5-S5-HI-A20-R
SR750-P5-G5-S5-HI-A20-R-E
SR750P5G5S5HIA20RTM8
SR750-P5-G5-S5-HI-A20-RTM8
SR750-P5-G5-D5-HI-A20-R
MIVII3000E00LO00
MMI301
TP1616SS
V7768-322000
V7768-330000
PCI-5565PIORC-110000
PCIE-5565PIORC
PCIE-5565RC-100000
PMC-5565PIORC
PCI-5565PIORC-210000
HE700GEN200
8851-LC-MT
531X100CCHAPM1