產品名稱：液體測量設備水位計

品牌：Solinst

產地：加拿大

型號：101B

Solinst 101B 水位計采用基本設計，使其成為深度到水位測量的非常經濟的選擇。101B 使用聚乙烯扁平膠帶，以厘米為增量進行熱壓印。可用的膠帶長度為 30 m、60 m 和 100m。堅固的不銹鋼 P1 探頭直徑為 ?" (12.7 mm)。

測量水位后，使用Solinst 膀胱泵采集地下水樣本。氣囊泵確保在運行過程中不會接觸空氣/水，提供具有代表性的地下水樣品和出色的 VOC 樣品結果。

Solinst 101B 型水位計旨在成為一種經濟、基本但耐用的測量地下水位的儀器。它非常適合測量井、鉆孔、立管和水箱中的水深。

Solinst 還提供帶有激光標記的 PVDF 扁平膠帶的標準 101 型水位計和 102 型同軸電纜水位計。這兩個選項都允許關閉和靈敏度調整（參見101 型水位計和102 型水位指示器數據表）。

101B 型水位計使用堅固的不銹鋼探頭，連接到耐用的聚乙烯扁平膠帶。一個標準的 9 伏電池，安裝在卷軸輪轂內，為水位計供電。電子元件涂有防水涂層。

當探頭進入水中時，電路完成，將信號發送回卷軸，在那里會激活燈光和清晰的蜂鳴器。然后通過直接從井套管或鉆孔頂部的磁帶上讀取讀數來確定水位。

 

101B 型水位計具有堅固的框架和符合人體工程學的手柄，用于纏繞膠帶。卷軸上還包括一個制動器。

為方便起見，面板前面還有一個探頭支架。

 

101B P1 型探頭由耐用的不銹鋼制成。它旨在減少級聯水中的錯誤信號，并且是防漏的。

尺寸： 12.7 毫米寬，102 毫米長（1/2" x 4"）

有效直徑： 16.5 毫米（5/8"）

重量： 100 克（3.53 盎司）

 

101B 型水位計使用高品質聚乙烯扁平膠帶，每厘米和每米都有精確的熱壓印標記。

10 mm (3/8") 寬的磁帶卷軸平穩，保持柔韌性，可筆直懸掛在井中，有 30 m、60 m 和 100 m 長度可供選擇。

七股不銹鋼導體耐腐蝕，提供強度且無拉伸。膠帶很容易維修和拼接。狗骨設計減少了對潮濕表面的粘附。

CM3：紅色米：每厘米有標記。

長度： 30m、60m 和 100m

中文內容來自機器翻譯，內容僅供參考，實際內容可參考原廠介紹或以合同為準。

英文原文：

Solinst 101B Water Level Meters feature a basic design, making them a very economical option for depth to water level measurements. The 101B uses polyethylene flat tape, heat embossed in centimeter increments. Tape lengths available are 30 m, 60 m, and 100m. The robust stainless steel P1 Probe is ?" (12.7 mm) in diameter.

Bladder Pumps for Groundwater Samples：

Once you've measured your water level, take a groundwater sample using a Solinst Bladder Pump. Bladder Pumps ensure no air/water contact during operation, providing representative groundwater samples and excellent VOC sample results.

The Solinst Model 101B Water Level Meter is designed to be an economical and basic, yet durable instrument to measure groundwater levels. It is ideal for measuring depth to water in wells, boreholes, standpipes, and tanks.

Also available from Solinst, are the Standard Model 101 Water Level Meters that feature a laser marked PVDF flat tape, and the Model 102 Coaxial Cable Water Level Meters. Both options allow shut-off and sensitivity adjustment (See Model 101 Water Level Meter and 102 Water Level Indicator Data Sheets).

Water Level Meter Operating Principles：

The Model 101B Water Level Meter uses a solid stainless steel probe, connected to durable polyethylene flat tape. A standard 9 volt battery, housed inside the reel hub, powers the Water Level Meter. The electronics are coated for water resistance.

When the probe enters water, the electrical circuit is completed, sending a signal back to the reel where a light and clearly audible buzzer are activated. The water level is then determined by taking a reading directly from the tape at the top of the well casing or borehole.

Sturdy Reel and Handle：

The Model 101B Water Level Meter has a sturdy frame and ergonomic handle for winding the tape. A brake is also included on the reel.

For convenience, there is also a probe holder on the front of the faceplate.

Robust, Accurate Probe：

The Model 101B P1 Probe is made from durable stainless steel. It is designed to reduce false signals in cascading water, and is leak-proof.

Size: 12.7 mm wide, 102 mm long (1/2" x 4")

Effective Diameter: 16.5 mm (5/8")

Weight: 100 grams (3.53 ounces)

Heat Embossed Polyethylene Flat Tape：

The Model 101B Water Level Meter uses high quality polyethylene flat tape with accurate heat embossed markings every centimeter and meter.

The 10 mm (3/8") wide tape reels smoothly, remains flexible, hangs straight in the well and is available in 30 m, 60 m, and 100 m lengths.

Seven stranded stainless steel conductors resist corrosion, provide strength and are non-stretch. The tape is very easy to repair and splice. The dog-bone design reduces adherence to wet surfaces.

CM3: Meters in red: with markings every centimeter.

Lengths: 30m, 60m and 100m

Heat Embossed Markings Each Centimeter