產品名稱： 溫度、液位、電導率TLC 儀表

品牌：Solinst

產地：加拿大

型號：107

Solinst TLC 107儀表是分析井和開放水域的電導率和溫度的理想選擇。

107 型 TLC 儀表非常適合分析井和開放水域的電導率和溫度、鹽水侵入 研究以及污染水平的一般指示。直徑為 3/4" (19 mm) 的探頭連接在 Solinst PVDF 扁平膠帶上；每 1/100 英尺或每毫米進行一次精確的激光標記。長度可達 1000 英尺或 300 m，安裝在 Solinst 卷軸上。

電導率范圍為 0-80,000 μS/cm。電導率和溫度測量值顯示在卷軸正面的旋轉 LCD 屏幕上。電導率精度為讀數的 5% 或 100 μS（以較大者為準）。當探頭的零點進入水中時，指示燈和蜂鳴器會短暫激活。從磁帶上讀取到水的深度和顯示讀數的深度。9V 堿性電池裝在一個易于取用的電池抽屜中，可提供長達 90 小時的使用時間。

LC 儀表非常適合分析井和開放水域的電導率和溫度。它在方便的 LCD 顯示屏上顯示電導率和溫度的準確測量值。

電導率測量值的讀數范圍為 0-80,000 μS/cm，讀數精度為讀數的 5% 或 100 μS（以較大者為準）。

水位和探頭深度測量值從 Solinst 耐用的 PVDF 扁平膠帶上讀取，該膠帶每 1/100 英尺或每毫米進行一次精確的激光標記。現在可提供長達 1000 英尺 (300 m) 的膠帶長度。

對于自動水位、溫度和電導率數據記錄，Solinst 還提供 Levelogger 5 LTC。（參見3001 型 Levelogger 5 LTC 數據表）。

 

磁帶長度可達 1000 英尺 (300 m)

堅固的 Solinst 卷盤和精確的 PVDF 激光打標膠帶

探頭直徑 3/4" (19 mm)

標準 9V 堿性電池可提供 90 小時。使用

8分鐘后自動關閉

 

無論溫度如何，高品質 PVDF 扁平膠帶都能順暢地卷起、保持柔韌性并筆直懸掛在井中。扁平膠帶安裝在一個堅固、平衡良好的 Solinst 卷軸上，并帶有一個方便的電池抽屜，用于放置 9 伏堿性電池。每 1/100 英尺或毫米的永久激光標記允許準確讀數。

標準不銹鋼導體和鍍銅不銹鋼導體抗腐蝕、提供強度且無拉伸。它們使膠帶易于維修和拼接。狗骨設計減少了對潮濕表面的粘附。

LM2：每個 1/100 ft、1/10 ft 和 ft

LM3：每個 mm、cm 和 m

長度：

100 英尺、200 英尺、300 英尺、500 英尺、750 英尺、1000 英尺

（30 m、60 m、100 m、150 m、250 m、300 m）

TLC Meter使用帶有鉑電極的“智能”電導率傳感器來測量電導率。電導率與相關的溫度測量值一起顯示在屏幕上。“智能探頭”顯示已標準化為 25°C 的電導率，即比電導率（顯示為 EC）。電導溫度系數為 2.0%/°C。

校準很簡單，使用 1413 μS、5000 μS、12,880 μS 和/或 80,000 μS 溶液進行 1、2、3 或 4 點手動電導率校準。

分析井和開放水域的電導率和溫度

鹽度研究

鹽水入侵調查

測試道路鹽對水質的損害

示蹤劑測試

化學污染水平的一般指示

水質變化預警：

垃圾填埋場

工業用地

當探頭的零點進入水中時，電路完成，短暫激活蜂鳴器并使屏幕消隱約 1 秒鐘。然后從磁帶上讀取到水的深度。當TLC 儀表從水中取出時，短暫的嗡嗡聲會發出警告，表明探頭現在已出水。

導帶器/基準允許在導帶器上的標記位置讀取深度測量值，以便在剖析井時提供可靠、可重復、準確的深度測量。導帶器可保護膠帶免受井套管粗糙邊緣的損壞。

TLC 儀表的工作溫度范圍為 -15°C 至 +50°C（23°F 至 122°F）。您可以選擇在 LCD 屏幕上以°C 或°F 顯示讀數。精度為攝氏 +/- 0.2°C，或華氏 +/- 0.4°F。“智能”TLC 探頭會自動調整測得的電導率值以顯示為比電導率。這提供了標準化的可重復可比測量。

當探頭打開時，LCD 屏幕顯示電導率和溫度。

中文內容來自機器翻譯，內容僅供參考，實際內容可參考原廠介紹或以合同為準。

英文原文：

The Model 107 TLC Meter is ideal for profiling conductivity and temperature in wells and open water, for salt-water intrusion studies, and a general indication of contamination levels. The 3/4" (19 mm) diameter probe is attached to Solinst PVDF flat tape; accurately laser marked every 1/100 ft or each millimeter. Lengths up to 1000 ft or 300 m, mounted on a Solinst reel.

The conductivity range is from 0-80,000 μS/cm. Conductivity and temperature measurements are displayed on a rotating LCD screen on the face of the reel. Conductivity accuracy is 5% of reading or 100 μS (which ever is greater). A light and buzzer are briefly activated when the zero point of the probe enters water. The depth to water and depth of displayed readings are read off the tape. The 9V alkaline battery is housed in an easy-access battery drawer and provides up to 90 hours of use.

Model 107 TLC Meter (Temperature, Level, Conductivity)：

The TLC Meter is ideal for profiling conductivity and temperature in wells and open water. It displays accurate measurements of conductivity and temperature on a convenient LCD display.

Conductivity measurements are read from 0-80,000 μS/cm with readings giving accuracy of 5% of reading or 100 μS (which ever is greater).

Water level and probe depth measurements are read off the Solinst durable PVDF flat tape, which is accurately laser marked every 1/100 ft or each millimeter. Tape lengths are now available up to 1000 ft (300 m).

For automated water level, temperature, and conductivity datalogging, Solinst also offers the Levelogger 5 LTC. (See the Model 3001 Levelogger 5 LTC Data Sheet).

 

Conductivity Made Easy：

Tape lengths to 1000 ft (300 m)

Rugged Solinst reel and accurate PVDF laser marked tape

Probe diameter 3/4" (19 mm)

Standard 9V alkaline battery gives 90 hrs. of use

Auto-Off after 8 minutes

 

Rugged PVDF Flat Tape：

The high quality PVDF flat tape reels smoothly, remains flexible and hangs straight in the well, irrespective of temperature. The flat tape is mounted on a sturdy, well-balanced Solinst reel, with a convenient battery drawer for the 9 Volt alkaline battery. Permanent laser markings each 1/100 ft or millimeter allow accurate readings.

Standard stainless steel conductors and copper coated stainless steel conductors resist corrosion, provide strength and are non-stretch. They make the tape easy to repair and splice. The dog-bone design reduces adherence to wet surfaces.

LM2: Each 1/100 ft, 1/10 ft and ft

LM3: Each mm, cm and m

Lengths:

100 ft, 200 ft, 300 ft, 500 ft, 750 ft, 1000 ft

(30 m, 60 m, 100 m, 150 m, 250 m, 300 m)

Water Conductivity Measurements：

The TLC Meter uses a 'smart' conductivity sensor with platinum electrodes to measure conductivity. The conductivity is displayed on the screen along with the associated temperature measurement. The 'smart probe' displays conductivity that has been standardized to 25°C, i.e. Specific Conductance (displayed as EC). The conductance temperature coefficient is 2.0% per °C.

Calibration is simple, using 1413 μS, 5000 μS, 12,880 μS, and/or 80,000 μS solutions for 1, 2, 3, or 4 point manual conductivity calibrations.

Applications：

Profiling conductivity and temperature in wells and open water

Salinity studies

Saltwater intrusion investigations

Testing for water quality impairments from road salt

Tracer tests

General indication of chemical contamination level

Early warning of changes in water quality at:

Landfills

Industrial Sites

Water Level and Depth Measurements：

When the zero point of the probe enters water, an electric circuit is completed, briefly activating a buzzer and blanking out the screen for about 1 second. The depth to water is then read off the tape. When the TLC Meter is withdrawn from the water, a short buzz gives a warning that the probe is now out of water.

A Tape Guide/Datum allows the depth measurement to be read at the marked position on the Tape Guide, to give reliable, repeatable, accurate depth measurements when profiling a well. The Tape Guide protects the tape from damage on rough edges of well casing.

Water Temperature Measurements：

The TLC Meter operates in a range from -15°C to +50°C (23°F to 122°F). You may choose to have the readings displayed on the LCD screen in °C or °F. Accuracy is +/- 0.2°C in Celsius, or +/- 0.4°F in Fahrenheit. The 'smart' TLC probe automatically adjusts the measured conductivity values to display as specific conductance. This provides standardized repeatably comparable measurements.

When the probe is turned on, the LCD screen displays both conductivity and temperature.