找商網手機端:m.zhaosw.com
PA6/66法國羅地亞B-50H1非增強共聚酰胺6.6/代理商6
價格
訂貨量(KG)
¥55.50
≥25
店鋪主推品 熱銷潛力款
聯系人 吳小姐 經理
莸莾莺莶莺莹莶莼莾莸莺
發貨地 廣東省東莞市
在線客服
東莞市群發塑料有限公司
店齡4年 企業認證
聯系人
吳小姐 經理
聯系電話
莸莾莺莶莺莹莶莼莾莸莺
經營模式
經營批發
所在地區
廣東省東莞市
進入店鋪
收藏本店
商品參數
|
商品介紹
|
聯系方式
名稱 PA6/66
型號 B 50H1
品牌 法國羅地亞
特性 良好剛性 ;磷含量,低(到無) ;脫模性能良好 ;無鹵
用途 電氣/電子應用領域 ;連接器
密度 1.16 g/cm3
流量 1.1 %
拉伸模量 3750 MPa
熔融溫度 242 ℃
阻燃等級 V-0
商品介紹
PA6/66法國羅地亞B 50H1非增強共聚酰胺6.6/代理商6
物理性能 干燥 單位制 測試方法 調節后的 |
密度 1.16 g/cm3 ISO 1183/A 1.16 |
收縮率 |
流量 1.1 % ISO 294-4 1.1 |
橫向流量 0.90 % ISO 294-4 0.90 |
吸水率 |
平衡, 23°C, 50% RH 3.1 % ISO 62 3.1 |
24 hr, 23°C 1.1 % ISO 62 1.1 |
室外適用性 f1 UL 746C |
機械性能 干燥 單位制 測試方法 調節后的 |
拉伸模量 (23°C) 3750 MPa ISO 527-2/1A 2200 |
抗張強度 |
斷裂, 23°C 70.0 MPa ISO 527-2/1A 40.0 |
屈服, 23°C 80.0 MPa ISO 527-2/1A 40.0 |
屈服, 23°C 85.0 MPa ASTM D638 85.0 |
拉伸應變 |
屈服, 23°C 4.0 % ISO 527-2 5.0 |
斷裂, 23°C 15 % ASTM D638 15 |
斷裂, 23°C 12 % ISO 527-2 100 |
彎曲模量 |
23°C 3700 MPa ISO 178 1100 |
23°C 3800 MPa ASTM D790 3800 |
彎曲強度 |
23°C 125 MPa ASTM D790 125 |
23°C 130 MPa ISO 178 40.0 |
沖擊性能 干燥 單位制 測試方法 調節后的 |
簡支梁缺口沖擊強度 |
23°C 3.5 kJ/m2 ISO 179/1eA 5.0 |
-30°C 3.0 kJ/m2 ISO 179/1eA 3.0 |
簡支梁無缺口沖擊強度 |
23°C 70 kJ/m2 ISO 179/1eU |
-30°C 80 kJ/m2 ISO 179/1eU 80 |
懸壁梁缺口沖擊強度 |
23°C 5.0 kJ/m2 ISO 180 6.5 |
23°C 50 J/m ASTM D256 50 |
熱性能 干燥 單位制 測試方法 調節后的 |
載荷下熱變形溫度 (1.8 MPa, 未退火) 85.0 ℃ ASTM D648, ISO 75-2/Af 85.0 |
熔融溫度 242 ℃ ISO 11357-3 242 |
可燃性 干燥 單位制 測試方法 調節后的 |
UL 阻燃等級 |
3.2 mm V-0 UL 94 |
1.6 mm V-0 UL 94 |
0.40 mm V-0 UL 94 |
0.8 mm V-0 UL 94 |
灼熱絲易燃指數 |
3.2 mm 960 ℃ IEC 60695-2-12 960 |
0.8 mm 960 ℃ IEC 60695-2-12 960 |
1.6 mm 960 ℃ IEC 60695-2-12 960 |
熱燈絲點火溫度 |
0.8 mm 750 ℃ IEC 60695-2-13 750 |
1.6 mm 650 ℃ IEC 60695-2-13 650 |
極限氧指數 33 % ISO 4589-2 33 |
電氣性能 干燥 單位制 測試方法 調節后的 |
表面電阻率 1.0E15 ohms IEC 60093 1.0E13 |
體積電阻率 1.0E15 ohms·cm IEC 60093 1.0E15 |
介電強度 (0.800 mm) 33 kV/mm IEC 60243-1 33 |
相對電容率 3.60 IEC 60250 |
耗散因數 0.020 IEC 60250 |
漏電起痕指數 (解決方案 A) 600 V IEC 60112 600 |
注射說明 |
The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: All reinforced, flame retardant compounds generate some level of abrasion/corrosion to the steel processing equipment. These issues may be magnified by using incorrect processing conditions (temperatures, residence time, moisture level ...) during the moulding process. Therefore, Solvay recommends you adhere to the processing conditions detailed in this technical data sheet. For equipment that comes into contact with molten flame retardant compounds, Solvay advises you to use a steel with high chromium and high carbon content (having a minimum concentration of 16% Chromium) to prevent corrosion and abrasion. For the correct reference of steel associated to flame retardant compounds' processing, please refer to your equipment manufacturers. In the case of high requirements on surface quality a mould temperature of up to 120°C can be considered. |
注射 干燥 |
干燥溫度 80 |
建議的最大水分含量 0.20 |
料筒后部溫度 245到250 |
料筒中部溫度 250到255 |
料筒前部溫度 250到260 |
模具溫度 60到80 |
補充信息 干燥 測試方法 |
European Railways Certifications |
R22 HL2 EN 45545-2 |
R23 HL3 EN 45545-2 |
聯系方式
公司名稱 東莞市群發塑料有限公司
聯系賣家 吳小姐 (QQ:782215440)
電話 莵莽莺莼-莶莼莵莽莵莾莾莾
手機 莸莾莺莶莺莹莶莼莾莸莺
傳真 莵莽莺莼-莶莼莵莽莵莾莾莾
地址 廣東省東莞市
聯系二維碼