其他定制尺寸，請聯系客服

拱門護坡模具具是一種能讓混合好的水泥成為所需要形狀的模板，這這種模具主要是由三毫米的面板、五毫米的筋板和經過硬化處理的緊固件構成的，這樣才能讓模具的尺寸精準，形狀大小適應環境的需求，有著很高的硬度來承受荷載。拱門護坡模具在澆筑的時候應該確保鋼模具的結構形狀和相互的位置是準確的，這樣才能在施工的時候維持平穩，使用的螺栓需要緊固牢靠，這樣能夠承受住在現澆的時候混凝土的重力和對鋼面板的側壓力，同時也能承受施工過程當中設備產生的負荷。拱門護坡模具的的施工應該按照工程的形式、壓力負荷大小、土質的好壞、施工前準備的材料和設備進行，使用的鋼面板應該在這個過程當中有著足夠的硬度和承壓能力，能夠在混凝土澆筑的時候比較安全可靠，能夠承受在一瞬間產生的重量和側壓力，保持平穩。拱門護坡模具在進行生產加工之前應該要對鋼模具進行驗收，尤其是其支撐的體系，在進行澆筑之前，要對模板和之間進行檢查，檢查其穩固的程度，如果有發現問題就要及時解決。The arch slope protection mold is a kind of mold that can make the mixed cement into the required shape. This mold is mainly composed of 3mm panel, 5mm rib plate and hardened fasteners. In this way, the size of the mold can be accurate, the shape and size can meet the needs of the environment, and has high hardness to bear the load. During the pouring of the arch slope protection mold, the structural shape and mutual position of the steel mold should be ensured to be accurate, so as to maintain stability during the construction. The bolts used need to be fastened firmly, so that they can bear the gravity of the concrete and the lateral pressure on the steel surface plate during the cast-in-situ pouring, as well as the load generated by the equipment during the construction process. The construction of arch slope protection mould shall be carried out according to the project form, pressure load, soil quality and materials and equipment prepared before construction. The steel panel used shall have sufficient hardness and pressure bearing capacity in this process, be safe and reliable during concrete pouring, and be able to bear the weight and lateral pressure generated in an instant to maintain stability. Before the production and processing of the arch slope protection mold, the steel mold shall be accepted, especially its supporting system. Before pouring, the formwork and shall be checked to check its stability. If any problem is found, it shall be solved in time.