截水骨架模具   混凝土拱形截水骨架模具

使用截水骨架模具   混凝土拱形截水骨架模具時具體的操作流程為：首先放樣測量，標注出骨架的位置，自上而下開始進行挖槽；槽坑挖完以后開始進行模具模板放置，如果坡度較大那么需要使用到吊車進行吊裝，人工進行拼接安裝拱形骨架模具，截水骨架模具   混凝土拱形截水骨架模具整體要進行拉桿連接固定；最后進行混凝土澆筑，澆筑時一定要使用振動棒搗鼓，并且注意澆筑的質量，不能出現跑漿的現象；混凝土澆筑完畢以后要工人進行灑水養護，截水骨架鋼模具 混凝土拱形截水骨架模具養護時間不得少于七天。When using the concrete arched water intercepting framework mold, the specific operation process is as follows: first, set out the measurement, mark the position of the framework, and start to dig the groove from top to bottom; after the excavation of the groove, start to place the mold template, if the slope is large, then use the crane for hoisting, and manually splice and install the arched framework mold, water intercepting framework mold The concrete arched cut-off framework mould shall be connected and fixed with pull rod as a whole; finally, the concrete shall be poured, and the vibrating rod shall be used to pound the drum during pouring, and the pouring quality shall be paid attention to, without the phenomenon of slurry running; after the concrete pouring is completed, the workers shall spray water for curing, and the curing time shall not be less than seven days.

At present, the concrete arched water intercepting framework mold is the most widely used mold for slope. Although there are also arched frameworks made of plastic materials, the problems such as short service life and substandard quality are prominent. Therefore, the construction team should also use the concrete arched water intercepting framework steel mold produced by professional manufacturers when selecting.

截水骨架模具   混凝土拱形截水骨架模具是目前坡體使用的最多的一種模具，雖然現在也有塑料材質的拱型骨架，但是使用壽命短，質量不達標等問題突顯，因此施工隊在選擇時還應該使用專業廠家生產的混凝土拱型截水骨架鋼模具才對。