拱形截水骨架模具  截水骨架模具

Preformed arch skeleton slope protection mould Because of its large model, the arch skeleton slope protection mould can not be processed by prefabrication, and it needs to be transported to the construction site to use and operate the mould. This cast-in-place production mode mainly deals with large-scale steel mould, including the mould with high construction requirements. One of the advantages of cast-in-place is slurry In fact, the molding will be shorter, because the mold is used outdoors, which strengthens the air circulation, and the prefabricated arch skeleton slope protection mold is used During the production of slope protection mould with arch skeleton, the workers need to transport and assemble the mould and its performance through the cooperation of some forklifts, and the steel mould itself will be heavier. Before assembling the mould, it needs to cut the slope of the mountain. This is to make the mould more stable when it is placed, and there will be no looseness or failure to fit the mountain The side must be reinforced, and the distance of drainage ditch must be reserved in advance, because the arch skeleton can not only protect the slope, but also accelerate the flow of sewage in rainy and snowy weather, which greatly improves the dangerous situation of the collapse of the mountain. Of course, the arch skeleton slope protection mold is prefabricated It is also very convenient to remove the arch skeleton slope protection mould after the mud molding.預制拱形骨架護坡模具  拱形骨架護坡模具因為其型號過大的特點，所以說不能夠采用預制的方式進行加工處理，而且需要將模具運送到施工現場來進行模具的使用與操作，這種現澆的生產方式主要是應對大型的鋼模具，包括對于施工要求非常高的模具，在現場澆筑的一大優勢便是泥漿的成型實際會短一些，因為是在室外進行模具的使用，加強了空氣流通的情況，在使用預制拱形骨架護坡模具  拱形骨架護坡模具生產的時候，工人需要通過一些叉車的配合將模具及性能運送組裝，鋼制的模具本身就會比較的沉重一些，在組裝模具之前需要進行山體的削坡，這是為了讓模具放置的時候更加的穩定，不會有松動或者是無法貼合山體的問題，模具組裝完成后兩側一定要進行加固，也要提前預留出排水溝的距離，因為拱形骨架不單單是可以有護坡的作用，也是為了在雨雪天氣的時候加快污水的流動，很大程度的改善了山體容易塌陷的危險情況，當然預制拱形骨架護坡模具  拱形骨架護坡模具在泥漿成型后拆模也會非常的便利。