宏旭  自嵌式擋土墻護坡模具  自嵌式擋土墻模具

In the initial stage of production, raw materials, cement, water, steel mold, iron oxide red, brightener and fine sand shall be used to prepare. Cement, fine sand and water shall be mixed evenly in a ratio of two to one (cement block shall be made by steel mold, and concrete shall be half dry and half wet as much as possible). Concrete shall be poured into prepared steel mold, and placed on the vibration platform for about 10 seconds. If color cement block is needed, The brightener and concrete can be mixed together. After the vibration, they can be placed in a suitable environment for maintenance. The steel mold can be demoulded quickly. It can be demoulded smoothly in three or two hours and can be adjusted according to the temperature of different environments. After demoulding, it can be used directly. It is convenient and simple. It is often used in some emergency projects. Light weight, corrosion resistance, anti-aging, simple pile body, suitable for a variety of different environments, even in a harsh environment will not cause any side effects; *

important river channel ecological retaining wall mold river ecological retaining wall mold is used for high-speed cement mold, the role is similar, for high-speed central to play an isolation role. River ecological slope protection wall mould the river ecological retaining wall mould is all prefabricated by sheet steel. Due to the large size of the individual and the uncertain size, plastic cannot be used for production, so steel mould can only be used for prefabrication.在制作初期,要將用到原材料,水泥,水,鋼模具,氧化鐵紅,光亮劑,細沙準備好,將水泥,細沙,水以二比一的比例攪拌均勻（用鋼模具制作水泥塊,混凝土的要盡量半干半濕）,將混凝土倒進準備好的鋼模具中,在震動平臺上震動大約10秒中放下即可,如果需要帶顏色的水泥塊,可以將光亮劑和混凝土一起攪拌,震動完成后放在適宜的環境中保養,鋼模具脫模比較快,三兩個小時就可以順利脫模,可以依據不同環境的溫度進行調節。脫模完成后可以直接使用,方便,簡單,在一些緊急工程中經常被用到。重量輕,抗腐蝕,抗老化,樁身簡明,適合于多種不同的環境使用,即使在急劇惡劣的環境下也不會造成任何的副作用；**重要河道生態護坡墻模具  河道生態擋土墻模具都是用于高速上的水泥制品模具,作用都是類似的,用于高速中央起到一個隔離的作用,河道生態護坡墻模具  河道生態擋土墻模具都是采用鈑金鋼預制成型,由于個體較大,尺寸不好確定采用塑料無法生產,只能采用鋼模具預制成型。