生態魚巢式護坡模具  宏旭模具  魚巢式護坡鋼模板

植草式護坡模具是按照具體預制塊的操作步驟進行的，植草式生態框模具屬于小眾類型的模具，但是體積大，生產技術要求嚴格，而且對于生態框的表面制作要求也是非常高的。植草式生態框模具凝聚力很好，它可以讓泥漿在短時間之內呈現凝固的狀態，并且在唾沫的時候需要將模具拆開，然后淋上一些清水就能夠取出完整的護坡磚了。這種生態框模具的話，他的尺寸比較的小常見的一些模具尺寸大概是在三十厘米五十厘米或者八十厘米左右，當然八十厘米的是比較大的，很多人會選擇五十厘米左右的模具來進行加工處理，這樣子才能夠讓生產出來的護坡磚更加的美觀。那么在進行施工的時候也要和制作一樣，要按照他的要求來進行操作，很多工程使用到該種護坡磚主要就是為了保護山體兩側的水土資源不在流失，同時也能夠達到美觀環境的目的，那么我們生產的時候就需要按照標準來進行操作了，植草式生態框模具它的制作時間非常的短，因?yàn)槟＞叩男吞栞^小，所以我們可以將整個生產時間控制在三個小時之內就可以得到比較完整的護坡磚了，之后將使用完成的模具浸泡在清潔溶液中清洗。

The grass planting type slope protection mold is carried out according to the operation steps of the specific prefabricated block. The grass planting type ecological frame mold belongs to the minority type mold, but it has large volume, strict production technology requirements, and the requirements for the surface production of ecological frame are also very high. Grass planting eco frame mold has good cohesiveness. It can make the mud solidify in a short time. When spitting, the mold needs to be disassembled, and then drenched with some water to take out the complete slope protection brick. For this kind of ecological frame mold, its size is relatively small. Some common mold sizes are about 30cm, 50cm or 80cm. Of course, the 80cm mold is relatively large. Many people will choose the mold of 50cm or so for processing, which can make the produced slope protection brick more beautiful. Then, in the process of construction, we should follow the same requirements as the production. Many projects use this kind of revetment brick mainly to protect the water and soil resources on both sides of the mountain from loss, but also to achieve the purpose of beautiful environment. Then we need to operate according to the standards when we produce. When we make the grass planting ecological frame mold It is very short, because the mold model is small, so we can control the whole production time within three hours to get a relatively complete revetment brick, and then soak the completed mold in cleaning solution for cleaning.